Question about 2003 Toyota Camry
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2004 Toyota Camry Brakes
Raise the vehicle up and remove the rims & tires
Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.
Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)
Tap the brake rotors off of the hubs, hit them from the back side of the rotor.
No big mysteries here, this is a very easy job.
Posted on Oct 21, 2008
SOURCE: Stalling Toyota Camry 2004
P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!
Posted on Oct 24, 2008
BEHIND THE DRIVERS KNEE PANEL IF IT IS FACTORY IT SHOULD BE JUST BEHIND THE DUCT WORK YOU CAN ALSO JUST UNPLUG THE PIGTAIL HARNESS IN BETWEEN THE IGN. SWITCH AND THE ALARM (PLEASE RATE THIS)
Posted on Apr 19, 2009
Tips for a great answer:
Feb 25, 2015 | 2004 Toyota Camry
Apr 17, 2012 | 2004 Toyota Camry
Jul 03, 2017 | 1997 Toyota Camry
Apr 28, 2010 | 2000 Toyota Camry
Sep 02, 2009 | 2001 Toyota Camry
Apr 19, 2009 | 1998 Toyota Camry
Jan 23, 2009 | 1998 Toyota Camry
620 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: