Question about Cars & Trucks

1 Answer

I have no brake lights i have checked all the bulbbs and fuses and the brake swicth but all seems to be ok but still no brake lights i have all other lights

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 161 Answers

Make sure the bulb socket are clean. if they are corroded use electronics cleaner to remove corrosion and rust. check the grounds to make sure they have a good connection. get a test light or volt meter and a helper to step on the brake pedal check for voltage at the socket. check the wires to make sure the wires are ok and not broken.

Posted on Jul 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights dont work, fuses are good


Check bulbbs if they are oki then check your brake light switch. Its usally under your brake Pedal. Good luck

Dec 11, 2010 | 1988 Toyota Camry

1 Answer

All my lights work except my brake lights. all my fuses are fine


the brake light swicth is at the top of brake pedal remove wires from swicth and brigde together if lights work replace swicth

Nov 07, 2010 | 1998 Isuzu Rodeo

2 Answers

No break lights, fuse good, what next.


Get a simple meter and remove your bulb and see if there is power to the brake light. Prop your brake pedal down so you can check the power. You have to rule out the bulbs first. Check your owners manual for what relay controls your lights that might be a problem as well.

Jul 02, 2010 | 1993 GMC Sierra K1500

1 Answer

NO REAR OR BRAKE LIGHTS BUT ALL BULBS AND FUSES SEEM OK.


check the Switch under the dash on the brake peddle . it could be stuck or broken get a a wire tie the lights together test for continuity at that switch. check your trailer light hook ups for shorts. If you have a braking power module for towing you may have to replace it or check and make sure it is getting juice.

Apr 07, 2010 | 1998 Dodge Ram 3500 2WD

1 Answer

No turn signals and lose brake lights when turn signal is used.


you need to replace the multifuction swicth (turn singnal swicth) that controll all of that stuff i have replaced many of them for that problem hope that this helps you

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

Third brake light works but the other two do not


check your fuse and brake light swicth, it's on the brake pedal

Mar 13, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

My brake lights just radomly went out - is there a fuze box somewhere to check for this or what would cause this? The back lights work bbut the brakes lights dont


Yea there is a fuse box under the dash driver side.The fuse box cover will tell you what fuse it is.If your fuse is good check for power @ brake swicth.You will need a test light for that { 5 or 6 bucks at parts store.

Mar 10, 2010 | 1995 Ford Thunderbird

1 Answer

All brake lights not working (already change light bulbs).


Did you check the fuse,#23 in JB center,this is hard wired to brake swicth, PK/BL should have 12v,if ok procede, wh/br will have 12v when brake is pushed on.if not replace the switch, jump the 2 wires and light sould come on, same feed goes to high mount lamps, does the info console warn of no lights, if you need more info, just ask. GOOD LUCK, RDJRP

Dec 25, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Brake and park light are out


the mechanic should check on the loose connection wires ,then check the fuses.and the brake light bulb. and the park light bulb.You have said that the other lights are ok then it must be the loose wires or the bulb.but still check on the fuses for to be sure .

Aug 09, 2009 | 2002 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...