Question about 1995 Isuzu Trooper

Open Question

What do you have to remove to change a starter on a 1995 trooper

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: 1995 isuzu trooper caliper removal

remove front wheel ,look at back of caliper and and look for teh two retaining bolts that hold the caliper to the support bracket.if not sure take it to a garage as any mistake could kill someone

Posted on Nov 15, 2008

  • 1 Answer

SOURCE: Starter removal - 1994 Isuzu Trooper

pull the starter away from the bellhousing and turn the drive end upwards then it will come out from the engine compartment tight i know but i have just done mine so i know it will come

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

V6. What are the size and length of the starter mounting bolts?


Probably 12mm X 1.5mm. Length is about 1 1/2 inches and 3 1/2 inches. They are metric.

Aug 06, 2015 | 1995 Isuzu Trooper

1 Answer

How do I change a starter?


Removing the front exhaust pipe from the engine will give you the necessary space to replace the starter motor on your Isuzu Trooper.
Click this link to get more details:---- http://technoanswers.blogspot.com/2011/02/how-to-replace-starter-on-1998-isuzu.html --------------------- This should help.Thanks.Helpmech.

Feb 26, 2011 | 1998 Isuzu Trooper

2 Answers

How do you remove the starter from a 1995 Isuzu Trooper? I need to know EXACTLY how to do it. I know it is on the drivers side of the engine, but still cannot even see it to remove it. Am I missing...


First, make sure you really need a new starter. Please see my tip at http://www.fixya.com/cars/r5973094-starter_replace . Let me know if you have more questions.

Are you looking from under the car? Here is a picture of where the starter should be:


jturcotte_208.gif



  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Label and disconnect the battery and starter control wires from the starter.
  4. If equipped, remove the starter bracket and/or heat shield.
  5. Remove the starter-to-engine mounting bolts.
  6. Lower the starter from the engine. If any shims are present, keep them for reinstallation purposes.

To install:
  1. Install the starter and shims, if equipped, to the engine. Tighten the mounting bolts to 30-34 ft. lbs. (39-44 Nm).
  2. Install the starter bracket and/or heat shield, if equipped.
  3. Reconnect the electrical connectors to the starter.
  4. Lower the vehicle.
  5. Connect the negative battery cable.
  6. Start the vehicle to make sure the starter functions correctly.

Nov 19, 2010 | 1995 Isuzu Trooper

3 Answers

Where is the starter located in a 1995 isuzu trooper?


The starter is on the drivers side of the 3.2 engine you will have to remove the cross over exhaust pipe to get at it.

Oct 11, 2010 | 1995 Isuzu Trooper

1 Answer

Need to replace starter


I recommend you get the Haynes repair manual on your vehicle. Start by removing the negative battery terminal, then removing the retaining bolts from the starter followed by removing the wires from the starter. Reverse the process to put the new starter on.

Jul 12, 2010 | 1988 Isuzu Trooper 2 Door

1 Answer

95 Trooper: dash backlight, RrABS/Brake Light


You can remove the dash urself.Its quite simple.4 screws.Then you can check the wire plugs at the back.And you can change the bulbs by twisting the plasic ends,
for your brakes change the pads..

Jul 19, 2009 | 1995 Isuzu Trooper

1 Answer

How do you remove starter on 95 Trooper after unbolted


you must remove engine mount on V6 engines

Mar 18, 2009 | 1995 Isuzu Trooper

1 Answer

Easy way to remove the starter motor please


You have to remove part of the exhaust manifold. That's pretty much the only way. If it's older, plan on making some new gaskets.

Feb 24, 2009 | 1995 Isuzu Trooper

2 Answers

How to put a new starter on 1990 Trooper


2.6L or 2.8L ?? I have a 2.6L and it took me 2 hours.

Jan 02, 2009 | 1990 Isuzu Trooper

1 Answer

1995 isuzu trooper caliper removal


remove front wheel ,look at back of caliper and and look for teh two retaining bolts that hold the caliper to the support bracket.if not sure take it to a garage as any mistake could kill someone

Sep 01, 2008 | 1995 Isuzu Trooper

Not finding what you are looking for?
1995 Isuzu Trooper Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...