Question about 1995 Nissan Pathfinder

2 Answers

Can't remove transmmission pan on my 4wd automatic 1995 nissan pathfinder can you help me?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It hung up on my exhaust trying to get pan off, hated to do it but cut exhaust. Came right off then

Posted on Dec 20, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

If all the bolts are removed your going to have to get unpleasant with it. Nissan uses a sealing compound that is basically a glue when they assemble these things. It is normally recommend that you has a gasket cutter to remove them but you can use a wide blade screw driver if your careful. You have to break the seal between the pan and the transmission housing but be careful not to ding up the housing or damage the pan.

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 Nissan Pathfinder 4wd starts and runs fine but it will not go into gear to drive or reverse,what is the problem?


How To put a Nissan Into 4 Wheel Drive - YouTube

? 2:09
https://www.youtube.com/watch?v=IirIxH0WIVI
Mar 13, 2011 - Uploaded by suzuki230
Just a quick How To, on putting your Nissan into 4 wheel drive. ... to warn the newbies not to drive on hard surface while in 4WDthis can ... If you're having difficulty engaging the 4wd low gear, you can steer ... Hey man i have a 1991 nissan pathfinder SE im going to install a ... How fast can you go on 4L?.

Nissan Pathfinder Questions - automatic will not go into any ...

www.cargurus.com > Questions > Nissan > Pathfinder

CarGurusautomatic will not go into any gear - was driving and parked. now it wonit go into gear. ... Asked by avips Apr 14, 2010 at 04:02 PM about the 1993 Nissan Pathfinder. Question type: Maintenance & Repair ... 2002 Nissan Pathfinder LE 4WD.

Automatic Transmission May Not Shift Correctly at High ...

repairpal.com > Problems > Toyota > 4Runner
truck periodically will not shift into drive at initial start-up. Will very often shift ... 1990Toyota 4Runner- Automatic Transmission100,000Visitor. I have very similar ...

10 Most Common Transmission Problems



Jan 01, 2016 | Nissan Cars & Trucks

1 Answer

Do you have to change the automatic transmission oil & how often ? Ihave a 2001 4wd pathfinder which has done 250000klms. and still going well. My email address is gklevy@bigpond.com


they recomend it but awell there is a filter in the tranny pan as well as a magnet or atleast should have a magnet to keep any filings out of the tranny i had a gmc had over 500,000.kms never changed it once

Dec 27, 2010 | 2001 Nissan Pathfinder

1 Answer

Need to replace starter on 1995 v6 pathfinder looks like if oil filter is removed starter will come out from top


If it's 4WD it recommends removing front gravel shield, and connector from oil pressure switch, then drain oil and remove oil filter. Then should come out top.

Nov 06, 2010 | 1995 Nissan Pathfinder

1 Answer

Where is the starter in a 1995 nissan pathfinder


Nissan Pick-ups and Pathfinder 1989-1995
Starter - REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Disconnect the negative battery cable at the battery, then disconnect the positive battery cable at the starter.
4178adf.jpg


Fig. 1: Starter removal on 4WD-6-cylinder engine

74f3669.jpg

Fig. 2: Starter removal on 2WD-6-cylinder engine
  1. On 4wd models with the 6-cylinder engine:
    1. Remove the front gravel shield.
    2. Detach the oil pressure switch connector.
    3. Drain the engine oil and remove the oil filter.
CAUTION The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. On 2wd models with the 6-cylinder engine:
    1. Remove the front right wheel.
    2. Remove the front gravel shield.
    3. Remove the exhaust manifold heat insulator.
    4. Remove the exhaust manifold.
    5. Detach the oil pressure switch connector.

  2. Unfasten the remaining electrical connections at the starter solenoid.
  3. Remove the two nuts holding the starter to the bell housing, then pull the starter toward the front of the vehicle and out.

Hope this help (remember rated this).

May 18, 2010 | 1995 Nissan Pathfinder

1 Answer

What is the radiator capacity?


Depending on the size of your engine, and if it's 2WD or 4WD, the cooling system can hold from 8-5/8 to 12-3/8 quarts

Oct 11, 2009 | 1995 Nissan Pathfinder

1 Answer

Adjust rear brakes 1995 Nissan Pathfinder 4WD


if they are disk brakes, they are not adjustable. if they are drums they should auto adjust. if they are not, then there is a problem that you have to pull the tire, then the drum, to diagnose it. you may have to disassemble the brake shoes and springs, and clean and lube the self adjusters

Jul 04, 2009 | 1995 Nissan Pathfinder

2 Answers

What type of transmission fluid should I use 95 nissan pathfinder


all trans. take dex 2 or dex 3     with your nissan being a 95 i would say dex 3 my friend.    dextron 3 is like dot 3 brake fluid it mixes with all fluids of its class.   

good luck
Jason

Jan 15, 2009 | 1995 Nissan Pathfinder

3 Answers

1995 Pathfinder...4wd will not engage. How does the engaging system work


If you are not using your 4WD more often, your front automatic locking hub will malfunction,
You need to have it cleaned and lubricated, dont use grease please

Nov 07, 2008 | 1995 Nissan Pathfinder

1 Answer

Removing an oil pan


Many cars require that you push the brake pedal before it will turn the starter. Keep brake pedal pressed. then try to start. If it still does not start, this still could be the problem. When the break pedal is pressed a switch is clicked on. It could be that the switch is bad.

Oct 26, 2008 | 1995 Nissan Pathfinder

Not finding what you are looking for?
1995 Nissan Pathfinder Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...