Question about 2005 Chevrolet Impala

1 Answer

Headlight not working

Only the PS headlight is not working. i try to replace bulb and it is still not working.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

TRY ANOTHER LIGHT BULB.BUT DONT LET BARE HANDS TOUCH BULBS BECAUSETHEY ARE HALOGEN.OILS FROM YOUR FINGERS OR HAND WILL CAUSE THE BULB OVER HEAT AND BLOW.IF YOU TRY ANOTHER BULB AND STILL DONT PROBLEM COLUD BE BULB SOCKET CORRODED OR DAMAGE OR WORN BULB CONTACTS.LOOSE POOR GROUND WIRE OR SHORT IN WIRES TO BULB SOCKET.

Posted on Jul 12, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

greezy_je208
  • 237 Answers

SOURCE: Right low beam headlight out. Tried replacing

id be checking the fuses as they are run on seperate ones.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

REPLACE HEADLIGHT 2008 SPRINTER


On some cases there are few hidden clips holding the assembly from under hood,that has to be released to remove headlight .

There are few troubleshooting help links showing how to replace car headlights,i suggest you to refer the links to solve these issue.

--------
Click the link below:------
How to Replace a Headlight http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

---------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------
Working of Headlight switch?
------------
Both headlight bulbs blow together?
------------
Car headlight bulbs don't last long?



----------------
These will help.
Thanks.

Nov 23, 2012 | 2010 Mercedes-Benz Sprinter

1 Answer

1997neon shifter won'T LIGHTUP


see this step and fix it. God bless you
Diagnosis: The problem could be a bad headlight bulb, a loose bulb or corroded bulb socket, a bad ignitor, or a bad ground connection or wiring harness fault at the ignitor. High Intensity Discharge Xenon headlight bulbs do not have a filament, so if the bulb has failed it may be cracked or leaking. The bulb also requires a high voltage ignitor to turn it on and keep it glowing. On some applications, the bulb and ignitor are one unit and can only be replaced as an assembly. On others, the bulb and ignitor are separate components, and can be replaced separately. The bulbs are expensive to replace ($50 to $100), and the ignitors are even more expensive to replace (up to $200!), so you want to make sure you have correctly diagnosed the faulty part BEFORE you replace anything.
TIP: Swap the "good" bulb that is working on the other side to the headlamp that is not working. If the headlight now works, you know the bulb you removed was bad and needs to be replaced. If the headlight still does not work, try swapping the "good" ignitor module on the other side to the side that is not working. If the headlight now works, the problem was a bad ignitor, not the bulb. You need to replace only the ignitor and not the bulb. If the headlight still does not work, you have a wiring fault such as a loose ground connection, a bad wiring harness at the headlamp housing, or a corroded bulb socket.

Oct 16, 2012 | 1997 Dodge Neon

1 Answer

I need to replace a 2000 jeep cherokee laredo headlight bulb. How do you get the headlight fixture out. I removed the screw that I thought was it but it did not budge... CJ


There is no screw involved. You do not remove the headlight housing. Look for wires going to the back of the headlight you should see a plastic retainer nut, take the nut off, pull out the pigtail connector and twist to the left to remove it from headlight housing, then pull the bulb out and replace. No screwdriver or any tools required.
P.S. Your local parts store usually will do this for you or show you how for free. As long as you buy the bulb from them.

Mar 07, 2011 | 2000 Jeep Grand Cherokee

2 Answers

How do i replace/remove the headlights from a 97 accord?


  1. Locate the headlight bulb that needs to be replaced. NOTE: It may be necessary to remove a component or the composite headlight assembly to gain access to the bulbs.
  2. Turn the headlights off.
  3. Detach the two prong connector from the base of the headlight bulb.
  4. Twist the bulb counterclockwise to unlock it from the headlight housing, then carefully withdraw the bulb from the housing. WARNING
    Do not touch the glass part of the bulb with your fingers. The pads of your fingers contain oils that will cause premature bulb failure. To install:
  5. Install a new bulb into the headlight housing, then turn it 1⁄4 turn to lock it into place.
  6. Attach the 2 prong connector to the bottom of the bulb.
  7. Turn the headlight switch on to make sure the bulb works, then turn the switch off.
  8. Install any components that were removed to get to the headlight bulb.

Mar 29, 2009 | 1997 Honda Accord

2 Answers

1998 ford ranger headlights do not come on when switch is turned


Look under the hood.
There is a large relay which should have some info about lights on it.
I had this exact problem with my dodge ram

Jan 26, 2009 | 1998 Ford Ranger SuperCab

1 Answer

Headlight replacement


the bulbs are removed from behind the headlight assy unplug bulb and twist off lock ring to remove bulb


ps do not touch glass while installing bulb

Jan 16, 2009 | 1987 Ford Thunderbird

2 Answers

1996 ford ranger headlights not working


It's the dimmer switch in the column.

Jan 06, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Headlight - replacement bulb


locate the back sid eof the tail light and turn the socket portion one way or the other then pull gently out. once you have the socket out pull the bulb and replace then put socket back and turn oposite direction.
Ps. hope tis helps and dont forget to rate the solution please. Thanks

Dec 28, 2008 | 1992 Honda Accord

2 Answers

Ford ranger headlights


check your head light switch

May 25, 2008 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
2005 Chevrolet Impala Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...