Question about 1991 Peugeot 405

1 Answer

Replacing a head gasket on a peugeot 306 xsi 2.0l 8valve engine. Need to know the tourque specifications for the cylinder heads and the camshaft.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hi there, if you still need to know the specs let me know and ill let you know them.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 3.8L what is the aspec diagram and tourque for the racker arm


Hi Juan, I'm AL the owner of Big As Auto Repair

Below is the torque specs for the rocker arm as you requested.

SPECIFICATIONS - TORQUE

DESCRIPTION N·m Ft. Lbs. In. Lbs. Camshaft Sprocket-Bolt 54 40 - Camshaft Thrust Plate-Bolts 12 - 105 Forged Connecting Rod Cap-Nuts 54 +¼ turn 40 +¼ turn - Cracked Connecting Rod Cap-Bolts (Refer to 9 - ENGINE/ENGINE BLOCK/PISTON & CONNECTING ROD - INSTALLATION) Crankshaft Main Bearing Cap-Bolts 41 +¼ turn 30 +¼ turn - Crankshaft Main Bearing Cap Cross Bolts (3.8L) 61 45 - Crankshaft Oil Seal Retainer Rear-Bolts 12 - 105 Crankshaft Damper-Bolt 54 40 - Cylinder Block Drain Plugs 20 15 - Cylinder Head-Bolts (Refer to 9 - ENGINE/CYLINDER HEAD - INSTALLATION) Cylinder Head Cover-Bolts 12 - 105 Flex Plate to Crankshaft 88 65 - Engine Mounting (Refer to 9 - ENGINE/ENGINE MOUNTING) Powertrain Torque Strut 54 40 - Exhaust Manifold-Bolts 23 - 200 Exhaust Crossover Pipe-Bolts 54 40 - Intake Manifold - Lower-Bolts 23 - 200 Intake Manifold - Lower Gasket Retainer-Bolts 12 - 105 Intake Manifold Upper-Bolts 12 - 105 Lifter Yoke Retainer-Bolts 12 - 105 Oil Filter Attaching Fitting 54 40 - Oil Cooler Attaching Fitting 27 20 - Oil Filter 20 15 - Oil Filter Adapter-Bolts 28 - 250 Oil Gallery Plug 27 20 - Oil Pan-Bolts 12 - 105 Oil Pan Drain-Plug 27 20 - Oil Pressure Switch 23 - 200 Oil Pump Cover Plate-Screws 12 - 105 Oil Pump Pick-up Tube-Bolt 28 - 250 Oil Dipstick Housing-Bolts 48 35 - Rocker Arm Shaft-Bolts 23 - 200 Spark Plug 16 12 - Thermostat Housing 12 - 105 Timing Chain Case Cover -M8 Bolt 27 20 - -M10 Bolt 54 40 - Water Pump-Bolts 12 - 105 Water Pump Pulley-Bolts 28 - 250
Should you need extra help visit my website here: http://www.bigasautorepair.com/

Apr 15, 2015 | 2005 Chrysler Pacifica

1 Answer

Need engine number location for peufeot 306 xsi


PEUGEOT 306 XSI 1998 16 V number=XU10J4R (RFV) same for 1999-2000-2003 models 306 XSI 1995-1997 manual number=XU 10J2 (RFX)

Oct 05, 2012 | Cars & Trucks

2 Answers

Replacing the cylinder head on a 2005 Hyundai Accent 1.6 dual overhead cam, need to know the Tourque Specifications for the cylinder head and intake manifold. thanks


Here's what the shop manual states:

30 Nm (300 kg.cm, 22 lb.ft)+90°+Release all bolts + 30 Nm(300kg.cm, 22 lb.ft)+90° In this instance you don't have a 'Torque to Spec"... you have a "torque to YIELD' In this specification, initially torque the head bolts to 22 lb ft... then turn each and additional 90°, then loosen each and REDO to the same specification = 22 lb.ft)+90° (you're actually crushing the head gasket TWICE and stretching the head bolts TWICE.

Apr 21, 2011 | 2005 Hyundai Accent

2 Answers

Where is the head gasket located at on a 1994 grand marquis


The head gasket (in your case gaskets) is located on the top of the engine block under the engine cylinder head which is under the Camshaft cover which is the very top of the engine. This car is a V8 engine so it has 2 heads and 2 head gaskets, one on each side of the engine. It is a very expensive job to replace head gaskets.

Mar 25, 2011 | Mercury Grand Marquis Cars & Trucks

1 Answer

Head gasket change


to remove head gasket first take off the valve cover and locate head bolts .make sure one is not broken . then remove timming belt cover and set engine to top dead center by the mark on the crank pulleyengine drive belt will also need to be removed.loosen timming belt tension ,mark belt osision and slide belt from camshaft gear .sometimes its easier to remove the gear.disconect fuel lines ,exuat pipe from manifold ,and sensor wires ,sparkplug wires and any other vacum lines wires ,ect ....that are conected the the cylinder head. before removel disconnect battery and drain cooling system. remove the head bolts ,inside and work to the outside in a circle.may need to pry head from the engine block careful .reinspect to make sure all hoses and wire ,lines are not still attached..always seems to be one thing that will still be attached..after head is removed ,you should be able to see where the gasket is damaged. clean all mating surfaces off engine block and head toinspect for cracks and damage.make it extra clean....razor blade scraper, sand paper ,brakecleaner and lots of shop towels. that is the most important to have clean surface ...install new gasket and reinstall head bolts to the proper tourque specs. parts guy can tell you if you dont know. when the head bolts are tight, this is a good time to drain oil and filter and after repair is finished install new 50/50 coolant. good luck with your repair

Feb 16, 2011 | 1994 Ford Escort

1 Answer

I need the head bolt torque specification for a 2005 aveo


install:
  1. The cylinder head should be cleaned and inspected prior to installation.
  2. Lightly oil all bolt and stud bolt threads before installation.
  3. Clean all gasket mating surfaces thoroughly.
  4. Install a new head gasket on the cylinder block. WARNING Always use new cylinder head bolts when installing the cylinder head or damage to the engine may occur.
  5. Install the cylinder head on the cylinder block.
  6. Tighten the cylinder head bolts in reverse of the removal sequence. Tighten the 2004 cylinder head bolts to 18 ft. lbs. (25 Nm). Tighten an additional 70°, plus 70°, plus another 50°. Tighten 2005 bolts to 18 ft. lbs. (25 Nm). Tighten an additional 60°, plus 60°, plus another 10°.
  7. Install the right engine mount. Tighten the engine mount attaching bolts to 22 ft. lbs. (30 Nm).
  8. Install or connect the following:
    • Intake manifold
    • Intake manifold support bracket. Tighten the bolts to 18 ft. lbs. (25 Nm).
    • Throttle cable
    • Surge tank coolant hose
    • Heater hose to cylinder head
    • Fuel feed line at the fuel rail
    • All vacuum hoses
    • Exhaust manifold
    • Rear timing belt cover
    • Timing belt tensioner. Tighten the bolts to 18 ft. lbs. (25 Nm).
    • Idler pulley. Tighten the bolts to 18 ft. lbs. (25 Nm).
    • Intake and exhaust camshaft gears. Tighten the bolts to 49 ft. lbs. (68 Nm).
  9. Apply a small amount of gasket sealant to the corners of the front camshaft caps and the top of the rear camshaft cover-to-cylinder head seal.
  10. Install the valve cover using a new gasket
  11. Align the timing marks on the camshaft gears.
  12. Align the mark on the crankshaft gear with the notch at the bottom of the rear timing belt cover.
  13. Install the timing belt and rotate the water pump clockwise to apply tension to the timing belt.
  14. Tighten the water pump bolts to 89 inch lbs. (10 Nm).
  15. Adjust the timing belt tension.
  16. Install or connect the following:
    • Spark plug wires
    • Upper and lower timing belt coversCrankshaft pulley. Tighten the bolt to 70 ft. lbs. (95 Nm), plus an additional 30°, then another 15°.
    • Accessory drive belt
    • Air cleaner housing
    • Radiator hoses
    • Front splash shield
    • Right front wheel
    • Coolant temperature sensor
    • Fuel feed line from fuel rail
    • IAT sensor
    • Intake manifold pressure sensor
    • DIS coil connector
    • Fuel injector connectors
    • ECM ground terminal
    • Negative battery cable
  17. Fill the engine with oil and coolant.
  18. Start the engine and check for leak0900c1528009e8b5.jpg

Apr 02, 2010 | 2005 Chevrolet Aveo

1 Answer

Peugeot 306 1.4 overheating problem, heater not getting warm, engine is running ok, radiator not getting warm, water coming from overflow pipe on rad/expansion tank, all hoses connected to engine getting...


Hi its the head gasket, you cant see no water in the oil on these engines like you normally can on most oil caps, pull the dip stick out and look on the bottom any sign of yellow gundge will be the head gasket, sometimes it is only a very small amount.

These cars always have the same problem, if i was you I would do the head gasket and waterpump at the same time, water pumps are only about £20 and wont add much to the bill if doing them at the same time.

As there is no water coing out of the bleed niple then it must be air locked somewhere, problem is when they get like this the gasket will blow anyhow.

Hope this helps
Regards
Dan

Jan 27, 2010 | 1989 Peugeot 405

3 Answers

Peugeot 306 temp use to reach 80 degrees drained coolant and replaced no temp reaches 98 but blowing cold air


The head gasket has gone, is it a 1,6 1.8 petrol? if so its the most common fault on that car. best way to tell pull the dipstick up and look at the very bottom if it looks creamy white then its the head gasket, also open the oil cap and look inside the head and on the cap any white creamy sludge means there is water in the oil, "head gasket"

Hope this helps

As the car was at 98 you will have warped the cylinder head so will need skimming costing £40 new head gasket fitted is about £170 do it your self for about £80

Jan 14, 2010 | 1989 Peugeot 405

1 Answer

Smoke problem


Sounds as though you have water in the oil. The white smoke is the steam. Check your oil by taking the dip stick out and if it looks like mayonnaise then your head gasket will need replacing. Once the head is off the engine block, there is no way safely to say how much work will be needed on the cylinder head. If the head gasket has blown then you will need to fit a new timing belt also.

Nov 24, 2008 | 1991 Peugeot 405

Not finding what you are looking for?
1991 Peugeot 405 Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...