Question about 2001 Dodge Dakota

1 Answer

Blower not turning to push air and heat through vents, Replaced blower motor, still not working. How do you get to the dash wiring to check electrical connections. fuse is good.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Replace the Blower Resistor. (About $12).

The resistor might be good; I have found that the terminals corrode, create resistance and sometimes melt the connector (About $100). Check the resistor before replacing it! If the connector gets fried, solder pigtails onto the good resistor and use Marr connectors to attach the pigtails to the existing wires,

Posted on Jul 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

When I turn on the air conditioning, why is very little air coming out of the dash vents?


Probably needs a recharge easy to check go to auto store get a kit hook it up turn on a/c full check gage and charge to level

Mar 30, 2015 | 2004 Dodge Dakota

1 Answer

No air will come out of the vents when the ac or heat is turned on dodge 2007 ram 1500


Does the blower motor work? If not check the blower motor--wiring circuits--fuses.

If it blows any air, defrost--floor--front of dash? Maybe a problem with actuator under the dash.

Feb 15, 2015 | Dodge Cars & Trucks

1 Answer

1999 ford f250 blower fan not working no heat


Do you have power and ground at the motor ?
If not, you would need to get a wiring diagram to trace the circuit back to the source. You did not mention the blower switch on the dash.
I am assuming you mean the blower motor is not running, or do you mean the motor is running but no air is coming out of the vents ?

Jan 08, 2013 | Cars & Trucks

1 Answer

My 2003 Camry vents are not blowing any air no matter what speed or tempature. But when I turn the defrost on a slight bit of a/c or heat (depending what I set it on) comes through. But the little bit of...


Can you hear the blower motor running ?
Could be a dirty cabin air filter, or blower problem, or blend door problem. The blend doors direct air thru the heater core and evaporator core as well as the vents.
If you have not replaced the cabin air filter check your owners manual on how to check it.

Aug 06, 2012 | Cars & Trucks

3 Answers

'94 Cadillac DeVille Concourse. My winsdhield


Follow the wires from the blower motor back to the blower motor resistor, normally only a few inches away and held in by a 7 mm screw. Replace it

May 13, 2010 | 1998 Cadillac DeVille

1 Answer

The heater puts out a tiny bit of warm air but not enough to warm the inside of the car.The only way to feel the heat is to put your hand over the vents I had the thermostat changed and the system...


is the blower motor working ? When you put the blower on high, it does not work right ? Check the blower motor resistor near the blower motor under the dash. it has a plug with a couple of wires. this is the most common cause when you turn on the blower and it does not work. If it is not the resistor it is the blower motor itself that has to be replaced.

Dec 29, 2009 | 1998 Ford Taurus

1 Answer

Heating


check your fuses sometimes when a blower motor goes out or gets replaced it pops a fuse if this does not turn out to be the problem its probably the power connection to the blower motor itself make sure the ground wire got placed back on the motor and has a good connection to the body and the power wire is free of corrosion and has a good connection

if this doesn't work get a 12v tester light from your local Walmart Kmart Target there about 5.00 place the ground on the body and push the sharp end into the power wire for the blower motor make sure the a/c switch is on. the tester light should come on if it doesn't check connection to the body / ground and try again if the light comes on there is power and the motor may be bad or have a bad connection if it does not you must have a blown fuse or a problem with the power switch

I hope this helps

Jul 20, 2009 | 2000 BMW 3 Series

2 Answers

No heat or cold air from vents


either bad blower motor or lose wire to blower motor.

Jun 13, 2009 | 2000 Pontiac Grand Prix

5 Answers

Blower not blowing


can you hear the fan working on all speeds?

Sep 22, 2008 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Dodge Dakota Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...