Question about 2004 Chrysler Pacifica

2 Answers

My electronic seat adjustment will not work, no way of moving the front seats up or back

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There was a recall for this. Call your local chrystler dealership.

Posted on Jul 13, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

Hi
this may because the motor operating the seat may be not getting power. please check weather it is getting the power by multimeter.
if it is not getting it there me several causes
1.fuse blown out.
2.junction box damaged
3.activating switch problem.repalce the switch

Posted on Jul 12, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Front driver seat adjustments.

I just had this problem fixed with a Tech 2 tool in my '03 yukon xl denali. The seat has a control module underneath of it that controls the 2-position memory, the power seat functions, etc. It needed to be reprogrammed - about $200 at the dealership, or free if you 1) have a good relationship with your service manager, or 2) own or know someone with a Tech 2 tool.

At first I thought it was because I had a Canadian model truck (the headlight switch is stuck "on" at all times no matter what position it's in, and the rear air controls are in celcius and not farenheight).

I'm assuming the switch worked before, and you may have encountered some sort of electrical issue (like a dead battery, or you gave someone a jump, you have a bad ground, you just installed an aftermarket stereo, you used a computer tuner, etc.).

Hope this helps!

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: Passenger seat won't go back

I have had the same problem. It occurs when you take the key out of the ignition to fast. Sounds stupid but if you turn the engine off and slow down the extraction of the key the seat will move as it should. I was turning off and taking the key out fast and the seat would not retract. Slowed everything down and now it works. Hope this works for you.

Posted on Jan 20, 2009

Sir_Charles1
  • 6 Answers

SOURCE: The electronic control for moving the seat back

Sometimes a coin gets trapped in the track, remove the seat and check, and clean and lube the track, some times all it needs is a little lube, or it might be the seat motor that is bad, you have to unbolt the seat to find out.

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: 02 jeep grand cherokee -

changing headlight bulbs

Posted on Apr 03, 2011

czaa
  • 4514 Answers

SOURCE: I have a 2002 VW Passat. The driver's seat is

cud be the switch or somethin lodged between the motor-try vacuuming-dont keep tryin cause motor will draw more amps

Posted on Aug 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i adjust the paasenger seat in my 1999 VW beetle?


There is a D shaped handle on the side of the seat nearest the door. Lift up on it and the seat back will fold forward, and the entire seat mechanism will lift up and to the front, giving your passengers room to get into the back seat. Simply push the seat back toward the rear of the car to set it back in place; it will lock itself down once it's back in its original position.

May 16, 2014 | 1999 Volkswagen Beetle

1 Answer

Back of seat adjustment


at the front of your seat(left side for the driver seat & right side for the passenger seat)rite at the curved corner in front of the seat beside your knees, the cloth seat has a hard plastic corner guard over the top directly in the middle of the corner in the front of the seat, and smack in the center is a up & down switch similar to that of the back seat window switch. it is well hidden & I had to have my head down there to discover it in the year2010, on a 1996 auto. the previous owner of the car did not believe me.

Apr 19, 2013 | 1996 Oldsmobile Cutlass Ciera

1 Answer

GMC Yukon Seat Switch


You don't mention what year your Yukon is ? This could very well be a control Module problem .
I'll post how the power memory seat's work or are suppose to work !

Memory Seats Description and Operation

Battery voltage is supplied to the memory seat module through a 25 A circuit breaker. The memory seat module supplies the seat adjuster switch assembly with a battery positive reference voltage. While the seat adjuster switches are in an inactive state the switch contacts are closed to the adjuster switch common circuit. When a seat adjuster switch is pressed to an active state the switch contact is closed to the reference voltage circuit. Battery voltage on a switch signal circuit indicates to the memory seat module the switch status is active. Each seat adjuster motor is controlled by the memory seat module through 2 motor control circuits. While the seat adjuster motors are in an inactive state the motor control circuits are closed to ground circuit contacts within the memory seat module. The memory seat module operates the seat adjuster motors by switching one of a motors control circuits to battery voltage. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.


Memory Set/Recall Operation
The seat adjuster motors are equipped with internal position sensors. The adjuster motor position sensors are monitored by the memory seat module and are used to determine the seat position when storing or recalling memory settings. The driver seat adjuster motors use potentiometer type position sensors. The position sensors are supplied with a 5 V reference and ground circuits from the memory seat module. The position sensor signal circuits return to an analog input within the memory seat module. During adjuster motor operation the position sensor provides a voltage change proportional to the change in revolution of the adjuster motor shaft. The memory seat module monitors the voltage from the position sensor signal circuits to determine the adjuster motor positions when storing or recalling memory seat position settings.
The memory recall switch assembly on the driver door provides inputs to the driver door lock/window switch. Battery voltage is supplied to the memory recall switch assembly from the driver door lock/window switch. When a RCL 1, RCL 2, or EXIT switch is pressed, the switch contacts close the appropriate switch signal circuit to the battery voltage supply circuit within the memory recall switch assembly. When the driver door lock/window switch receives active switch signals from the memory recall switch assembly, the appropriate commands are sent to the memory seat module using the GMLAN Serial Data circuit. The Body Control Module software version determines the personalization features available.
Memory seat recall operation is allowed only with the transmission selector lever in the PARK position while the ignition is on. The transmission selector lever position data is provided to the memory seat module by a message through the GMLAN Serial Data circuit.

There are somethings listed you are not familiar with , like GMLAN Serial Data circuit ,maybe Body Control Module software etc... GMLAN is a communincation network that the computers on the vehicle uses to share information , transmit commons etc... you can google it to read about it .

There are DTC'S - diagnostic trouble codes that can set in the module in control . Do you know what DTC'S are .

DTC Descriptors
DTC B1825 01: Driver Seat Recline Position Sensor Circuit Short to Battery
DTC B1825 06: Driver Seat Recline Position Sensor Circuit Short to Ground or Open
DTC B1825 5A: Driver Seat Recline Position Sensor Circuit Plausibility Failure
DTC B1850 01: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Battery
DTC B1850 06: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Ground or Open
DTC B1850 5A: Driver Seat Lumbar Horizontal Position Sensor Circuit Plausibility Failure
DTC B1860 01: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Battery
DTC B1860 06: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Ground or Open
DTC B1860 5A: Driver Seat Lumbar Vertical Position Sensor Circuit Plausibility Failure
DTC B2355 01: Driver Seat Front Vertical Position Sensor Circuit Short to Battery
DTC B2355 06: Driver Seat Front Vertical Position Sensor Circuit Short to Ground or Open
DTC B2355 5A: Driver Seat Front Vertical Position Sensor Circuit Plausibility Failure
DTC B2365 01: Driver Seat Rear Vertical Position Sensor Circuit Short to Battery
DTC B2365 06: Driver Seat Rear Vertical Position Sensor Circuit Short to Ground or Open
DTC B2365 5A: Driver Seat Rear Vertical Position Sensor Circuit Plausibility Failure
DTC B2375 01: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Battery
DTC B2375 06: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Ground or Open
DTC B2375 5A: Driver Seat Assembly Horizontal Position Sensor Circuit Plausibility Failure

5) Memory Seat Module is under the front of the driver seat , you could look under an see if all the connectors are fully seated.

The best diagnostic step would be to hook up the factory scan tool an see what the computer is seeing as far as inputs from the switch an outputs it's sending . I wouldn't suggest you take the seat apart an try testing electrical inputs etc.... unless you very familiar with automotive electrical systems an circuits .

Mar 06, 2017 | GMC Cars & Trucks

2 Answers

I am having trouble with my 94 Chrysler concorde the motorized driver seat isn't moving positions and I have tried everything, I don't want to force it cause I don't want to break the seat, please, any...


the seat adjuster assembly is bad. i was a chrysler tech for 15 years. the motor that runs the forward and back is either bad or the tracks are bad and it is binding. you can not get parts for it. you will have to buy a new complete adjuster or see if a boneyard may have a good used aseembly. Don

Mar 06, 2011 | Chrysler Concorde Cars & Trucks

2 Answers

Driver seat stuck all the way back, manual adjustment - 2009 Camry


I just had the same problem with a Toyota Corolla 2009. The seat was stuck all the way back, I could move just 1 setting "click" front and back. This happened after I picked up the car at the car wash.

I took the front seat + tracks completely out (4 14mm screws) to discover it was a QUARTER stuck in the track, near the seat belt buckle mount. That was preventing the seat to move.


1_9_2013_3_30_20_pm.jpg

Hope it helps you or anyone else having the same problem!

Aug 08, 2010 | 2009 Toyota Camry

2 Answers

Need to move front passenger seat much further back


the only way to do this is to take the seat out remove it from the rails take the rails to a machine shop and have them weld on extensions for the seat to slide on. you will also have to remove the rear seat stop so it will go further back and have them make catches in the extension for the seat to catch onto.

Aug 28, 2009 | 2004 Ford F350

1 Answer

The electronic control for moving the seat back


Sometimes a coin gets trapped in the track, remove the seat and check, and clean and lube the track, some times all it needs is a little lube, or it might be the seat motor that is bad, you have to unbolt the seat to find out.

Mar 17, 2009 | 1999 Lincoln Town Car

1 Answer

Passenger seat won't go back


I have had the same problem. It occurs when you take the key out of the ignition to fast. Sounds stupid but if you turn the engine off and slow down the extraction of the key the seat will move as it should. I was turning off and taking the key out fast and the seat would not retract. Slowed everything down and now it works. Hope this works for you.

Oct 14, 2008 | 2004 Buick Rainier

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...