Question about 2003 Dodge Grand Caravan AWD
UPSTREAM OXYGEN SENSOR
The oxygen sensor is installed in the exhaust manifold Upstream Heated Oxygen Sensor - 2.4L. or Upstream Heated Oxygen Sensor - 3.0L. or Upstream Heated Oxygen Sensor - 3.3/3.8L .
CAUTION: Do not pull on the oxygen sensor wire when unplugging the electrical connector.
WARNING: THE EXHAUST MANIFOLD AND CATALYTIC CONVERTER MAY BE EXTREMELY HOT. USE CARE WHEN SERVICING THE OXYGEN SENSOR.
Raise and support vehicle.
Unplug oxygen sensor electrical connector.
Use a socket such as Snap-On YA8875 or equivalent to remove sensor.
When the sensor is removed, the exhaust manifold threads must be cleaned with an 18 mm X 1.5 + 6E tap. If using original sensor, coat the threads with Loctite 771-64 anti-seize compound or equivalent.
Reverse removal procedure to install a new sensor
New sensors are packaged with compound on the threads and no additional compound is required. The sensor must be tightened to 27 N·m (20 ft. lbs.) torque
Posted on Jul 12, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 14, 2017 | Toyota Cars & Trucks
Jul 28, 2015 | 2006 Toyota Corolla
Aug 28, 2013 | Cars & Trucks
Jul 17, 2013 | 2002 Nissan Maxima
Jul 29, 2012 | Cars & Trucks
Nov 27, 2011 | 1997 Honda Accord
Dec 12, 2009 | 2003 GMC Sierra 2500HD
Oct 06, 2009 | 2002 Toyota 4Runner
Jun 25, 2009 | 2006 Pontiac G6
Jun 09, 2009 | 1998 Honda Accord
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: