Question about 2000 Chevrolet Cavalier

1 Answer

Engine light on. diag tester code P1137 undefined code what should i do next?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

P1137 relates to a blip in the fuel trim where as the max threshold was reached. I have simply deleted the code in the past and it was ok, never came back. However if it does come back you will need to find the cause. This is most likely a MAP or MAFS fault.

Regards

Lloyd Six

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p1137 2002 pontiac sunfire


Change O2 Sensor number 2 which is down stream after the cat. Low voltage during power enrichment sensor 2

Jun 03, 2014 | 2002 Pontiac Sunfire

1 Answer

Obd 2 reads p1137 on my 2000 beetle. Blend to rich what do ido


Its your oxygen sensor. But some car's has more than one. Could be on bunk 1 side or bunk 2. Usually, codes will tell you like p1137 then definition. Bunk 1 means before the catalytic converter, bunk 2 means after. All car manufacturer has different location on this sensors defending on engine size. Good luck.

Nov 16, 2013 | Cars & Trucks

1 Answer

Need to reset the check engine light


This is for the 16 pin diag
With obd-2 or home made code reader retrieve codes. After each code press and hold the button on the tester for 6-8 sec. then retrieve next code. After code is received press and hold for 6-8 seconds. Continue until code reader flashes only 1 time. Do this for slot 3, 8 and 14. Once all sections return a single flash code indicating no malfunction, turn ignition off. Next time you start the vehicle the light should be off. If still on, check for codes! If new codes perform repairs!

Feb 05, 2012 | 1993 Mercedes-Benz E-Class

1 Answer

Idles rough and low intermittently. Stalls occaisionally. Error code P1137 pulled off of the computer. 2001 Alero, 2.4L Automatic trans


P1137 is HO2S Bank 1 Sensor 2 Lean Or Low Voltage. Oxygen sensor is reading a "lean condition". This code probably is stored from the rough and low idling. So it sounds like you maybe having other issues causing this P1137 code to come up. For lean conditions read this:
1. Vacuum leaks - check for failed or loose vacuum lines, leaking intake gaskets, intake air tubes loose or any other source of un-metered air leaks (leaks after the Mass Air Flow Sensor)
2. Restricted fuel filter or bent/pinched fuel system lines
3. Incorrect input from other sensors, such as the Mass Air Flow Sensor/cam or crank sensors, which may not always drop a separate code
4. Engine misfire ? Yes I know this one may seem weird. You might think that if there is a misfire then you will have all that unburned fuel and it should read rich; right? Well the O2 sensors read only oxygen content in the exhaust, so if you have all that unburned fuel from incomplete combustion then, you guessed it, you also have all that unburned oxygen. High O2 content in exhaust equals a lean reading!

Sep 07, 2011 | Oldsmobile Alero Cars & Trucks

2 Answers

Service engine light comes on , what kind of scaner is needed


you can use a standard scanner with a adapter or you need a paperclip. You find the diag connector under the driver dash board. If you put the paper clip from A to B and turn the ignotion on (dont start the car) and watch the check engine light. The light will blink a code three times and then move to the next code if there is any. It will blink like so for example if the code is 12 it will blink once pause then blink twice and repeat three times. It will then display any other codes. Remember that it will show each code three times before moving to the next code. You can research the codes online, at any autozone or post them here and I will tell you what the meanings are and try to give you a course of action to follow.

Nov 30, 2010 | 1995 Cadillac DeVille

1 Answer

It is at 161,000 miles and check engine light is on


You need to have computer diag. done, some parts places like autozone will do a free code reading for you, the check engine light means that your computer pick up a bad signal from one of your engine sensor's, get the code and get back with us here at FixYa so we can help you diag your trouble code.

Jun 09, 2010 | 2000 Toyota Camry

1 Answer

Getting code P1022 when checking onboard diag. chek engine light also on intermitt 03 jeep wrangler 6 cyl 4X4


that is an injector problem.injector # 2 is letting out a high output.this could be there is a bad connector or a damaged wire.this will affect the way your injector reacts and will cause the check engine to go on and off.you would need an injector tester to check the spray pattern for your injector.

Oct 04, 2009 | 2003 Jeep Wrangler

3 Answers

Diagnostic Connector has no power to get a code.


check the fuse for the cigarette lighter. it is the same circuit as the diag. port power.
replace fuse if failed and check codes.

May 31, 2009 | 1997 Geo Metro

1 Answer

I have a check engine light on


code p2404 is from a none volvo tester it would convert over to volvo code ecm 432a ,leak diag. pump failure,now dont play with it driving should be ok but you should take it to the dealer or a volvo only shop and read codes and fix it when your ready

Aug 16, 2008 | 2004 Volvo S60

Not finding what you are looking for?
2000 Chevrolet Cavalier Logo

Related Topics:

803 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...