Question about 1999 Volkswagen Golf

1 Answer

Reversing lights have stopped working, bulbs and fuses are fine?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

Hi

this may be because of the following reasrons
1.the swich which activates lights when you put reverse gear may be damaged so not activating the lights
2.the wire going to lights might have chopped off
3.the junction box/relay may be burnt out/damaged.

check all these stuffs.

please vote me if the information which i gave was useful to you

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 03 GMC 3500 dually that the driver's side fender running lights won't light up. The passenger side work fine. Also my reverse light doesn't light up either. Could that be the problem?


check battery voltage both sides of stop light switch if if none check fuse , if one side only replace switch, if ok check voltage at light bulb holder if ok check bulb or earth system

May 02, 2017 | GMC Sierra 3500 Cars & Trucks

1 Answer

Hyundai tuscon 05. Reverse light doesnt work, bulb fine ,fuse are good and new switch installed. What next?


Does bulb socket have a ground wire, or just uses mounting point as ground? Check for voltage at each part of system. Start with fuse, then switch both in and out of reverse, then bulb.

Dec 19, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?


if the backup bulbs are good then check the neutral switch as this is where the reverse switch is, its part of the neutral switch. it may have stopped working and need replacing. you will be replacing the neutral switch. if you have power out of the switch then check for power and ground at the light socket as there could be a bad wire or connection.

Aug 16, 2014 | Cars & Trucks

1 Answer

No reversing lights on BMW 320d 06.


Hey I'm having the same problem with my BMW 320d 2005 car. Fuses, switches ,bulbs are all fine abd reversing lights still not working . Please help me out

May 21, 2013 | 2006 BMW 320d

1 Answer

2009 V50 back up lights are both out. What could it be? Not the fuse or bulb.


if fuse and bulbs are fine then it's your reverse switch that's not working. it is located at the transmission, change it. but before changing you should make sure that the wires are not cut or faulty.

Feb 08, 2013 | Cars & Trucks

1 Answer

I have a 2004 Chevy Cavalier and the back up lights suddenly stopped working. I checked the fuse and it is fine and working cause back up lights are on same fuse as turn signals and they work. The bulbs...


Hello! If the transmission is a standard there is a "back up switch"with the wire colors Pink and Light Green which closes in reverse and applies battery (12 volts) to the lights...If, however, the car has an automatic transmission there is a switch (park neutral) same wire colors that when placed in reverse applies battery to the lights...Either one of the switches is defective...see photos below...Guru...saailer



5_3_2012_9_49_33_am.jpgSTANDARD MOTOR PRODUCTS Part # LS224...cost=$20..(standard)



Park neutral sw.
AIRTEX / WELLS Part # 1S5108...cost $70




5_3_2012_9_53_58_am.jpg

May 03, 2012 | 2004 Chevrolet Cavalier

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

Reverse lights do not work


definately check the fuse, if it is good then you need to check the condition of ground in the light bulb sockets, if good then you will have to check the reverse light switch

Mar 23, 2009 | 1995 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...