Question about 2001 Ford Escape
Posted by Anonymous on
You have a mechanism failure on the changer which is preventing the mode of the function to return to the normal state. Hence the processor is giving out the error signal. First of all open the changer and ceck for mechanism damage. if not slowl try to rotate the load motor to return to the normal state and eject. now check the connections to the motor, the flexible line wiring may be defective. use a loop wire or test the continuity from the motor. if there is a rest switch use it for resetting, if not disconnect poweer nd power again. Some cd'smay be warped or damaged and causing to block the sensitive transport. remove of these cd's and testt again. if there is no motr drive at all then the IC of the motor drive has failed. clean and set back. hope this helps you. Good day
Posted on Jul 12, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 22, 2011 | 2004 Ford F150
Mar 11, 2011 | 2002 Ford Escape
Jun 12, 2010 | 2003 Ford Escape
Mar 03, 2010 | 2003 Ford Expedition
Feb 16, 2010 | 2003 Ford Escape
Jan 06, 2010 | 2001 Lincoln LS
Jul 29, 2009 | 2003 Ford Escape
May 18, 2009 | 2001 Ford Taurus
Apr 06, 2009 | 2001 Ford Escape
822 people viewed this question
Usually answered in minutes!