Question about 2002 Ford E250

Open Question

2002 ford E250 drivers side window will not go up. I took off door panel and it seams to be stuck when I try to raise the window I can here a faint click from the moter and it is hot. What shoul I do??

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ilragatzzo78
  • 241 Answers

SOURCE: 99 ford expedition power window

no, you will have to remove the window motor to raise the window up manually.

Posted on May 15, 2008

sicaudio
  • 96 Answers

SOURCE: Driver's side door power locks are stuck; door stuck shut.

sounds like the rods are disconnected the clips hold the rods in place the latching mechanism holds the handle in place as well did you replace the speakers or did a shop? if a shop did then they caused this if you did then you may have caused this either way untill you reattach the rods none of it will work. you will have to manually open the door at the latch from inside teh door behind the panel.

Posted on Jul 19, 2008

  • 5 Answers

SOURCE: window drivers side ford focus 2000

On the handle part of the door the panel pops off and there is more screws in there. Good luck!

Posted on Jul 30, 2008

  • 58 Answers

SOURCE: Drivers electric window stuck in down position

actually you have thought of all but the prob. The track has jumped, making the motor not move the window. Sometimes you can gently slide the window up by hand and then the motor will catch the track and finish rolling the window up

Posted on Jul 05, 2009

  • 166 Answers

SOURCE: 2002 Ford Explorer - Drivers side door lock, rear

Aside from the fuses, your drive side power door lock may be failing to work because of a bad door-lock relay system, or, alternatively, the locking switch/button, itself, is not malfunctioning and in need of replacement.

A great handyman site that specifies the above probable causes and more is the following link:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Locks_Power_Locks_Do_Not_Lock_When_Pressing_Locking_Switch_Button.htm

Good luck!

Posted on Jul 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

Window wont raise


If its automatic, and all other windows raise with the button panel on the drivers door, then your problem is the motor within the door that raises or lowers the window. Easy quick fix.

If manual, the window probably got stuck and is jammed up within the door and needs to be bumped or put back on the track.

Jun 07, 2012 | 2006 Dodge Stratus

1 Answer

2002 BMW 325CI (convertible)power window on driver's side does not automatically go down slightly when the door is opened. I assume this is only on the convertible so the window clears the top. It normally...


My window on my vert was doing that. Short of opening up the door and trying to do it myself, I took it in to the BMW guys at Bimmerhaus. They readjusted the window for me and it was good to go. Pretty much cost 1 hour of labor and a couple of clamps. $100+ or thereabouts.

Aug 05, 2010 | 2002 BMW 3 Series

1 Answer

Power window stuck down halfe way


You could try to manual raise the window with your hands. or you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. then pull back the seal and raise the window from the inside at the regulator. Then you'll have to wedge something into the door to prop the window up

Aug 20, 2009 | 2002 Nissan Altima

1 Answer

Ford cargo van power windows and power side mirrors don t work


the power wire in the drivers door harnee is bad

Mar 05, 2009 | 2002 Ford E250

1 Answer

2002 sports track drivers window will not raise


Could be the motor or a relay for the auto down in the switch. my first thought is the motor though on a 02. Maybe if you take your fist and beat on the lower front part of the door panel while pushing the switch to raise the window you could jar the motor and it will go up.

Feb 23, 2009 | 2002 Ford Explorer Sport Trac

1 Answer

2001 ford f150 drivers side window does not work , clicking sound


Listen real close under dash when trying other windows, and see if you don't hear faint click with them too. I'm guessing your driver side motor is tired, but perhaps a little lube and some coaching, it will come back again, otherwise door panel will have to come off to try a few things, or replace motor. It's the one that gets most used, so is most likely to give out first.

Dec 31, 2008 | 1990 Ford F150

1 Answer

Front passenger window does not work


sounds like bad regulator, pull your door panel apart and it is the part that goes onto the motor. long bow shaped thing with cable attached. pop out rivets, (I think 3 rivets) and on the upper side there are 2 nuts that have to be removed. then wiggle it around till you can get it out of the biggest hole in door. Good Luck.

Jul 21, 2008 | 1995 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...