Question about 2006 Nissan Altima

1 Answer

2006 nissan altima's power window'spower lock'sand power driver seat suddenly stop working. Please advice!

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 733 Answers

Check all your fuses.

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a power seat that stopped moving


Unless you are mechanically inclined, take it to a mechanic who and either fix it, or install a new one.

Mar 25, 2015 | 2006 Nissan Altima 2.5

1 Answer

Power seat and all power windows stop working


Most likely a fuse and or a curcit braker problim.get owners manual find witch fuse runs both.

Mar 18, 2013 | 2006 Nissan Altima

1 Answer

My power locks power windows and power drivers seat all quit working at the same time on my 2006 nissan altima. Checks all the fuses? Any help please we have rain moving in. If it could be a relay, which...


I have seen this common problem on several Altimas. You have a wire that has been pinched in your power seat that is frayed and grounding out on the seat frame causing the circuit breaker in the BCM to trip. U will need to remove the drivers seat from the car, Use a screwdriver to pop off the seat adjustment knobs, the pop off the plastic cover from the seat switch. There are two phillips head screws holding the switch to the seat. It is necessary to cut the seat material a small amount to access the screws and remove the switch. U will need to unplug the switch from the bottom side of the seat and unclip the wiring harness from the seat frame in order to remove the switch/wiring harness assembly. Once removed you will see the chafed wire. Simply cut the insulator that covers all the wires back far enough to repair the wire. I normally take a small piece of vacuum hose, split it down the middle and put over the chafed wire. Tape everything up with some electrical tape. When putting everything back together, re-route the wiring harness to a different location so it doesn't get pinched again. Re-install the seat and enjoy having all of your power options working again. If you need any more info on this or some helpful pics, let me know. Have a good day!

ASE Certified Auto Tech
Scott Day

Mar 28, 2012 | 2006 Nissan Altima

1 Answer

I have a nissan altima power lock, windows,seats dont work please help?


Have you checked for blown fuses.check owners manual for fuse and fuse block location

Jun 13, 2011 | 2008 Nissan Altima

2 Answers

The recline on my power seat stopped working


I just bought a 2005 Nissan Altima that had the same problem. The motor was fine. I opened the switch and found that a trace on the small circuit board was cut/missing. I soldered it on the spot and it solved the problem. You can access the switch by carefully prying off the switch buttons, then the plate. There are two screws that must be removed so that you can pull the switch assembly out of the seat.

Jul 14, 2009 | 2003 Nissan Altima

1 Answer

1993 electric windows stopped working on nissan altima


hard to say without testing, but the master window switches are common and will stop the rest of windows working, make sure window lock switch if off

Nov 15, 2008 | 1995 Nissan Altima

1 Answer

Power locks and windows


bad connection at master switch, drivers side door. Remove switch and check connection.

Jul 05, 2008 | 2005 Nissan Altima

1 Answer

2005 nissan Altima 3.5 SL


I DONT HAVE PAWER IN MI RADIO

Jun 22, 2008 | 2005 Nissan Altima

1 Answer

Drivers door Power Lock


my nissan altima had the same problem, i changed the alternator and it stopped.

Jun 11, 2008 | 2006 Nissan Sentra

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...