Question about Cars & Trucks

1 Answer

How to take off existing fog lights on a 2003 escalade and install new fog light assembly

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The fog lamp assemblies can be removed by getting underneath the front bumper and on top of the fog lamp assemblies you will find the metal mounting bracket. The bracket attaches to the vehicle with 3 small bolts that are 8-10mm (i forgot exactly) that bolt down through the bracket into the front bumper cover above the actual lens itself and can be accessed with a box wrench. I replaced both assemblies in mine in under 1/2 and hour!

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I turn on fog lights on a Cadillac escalade esv 09


If it is a turn knob for lights just pull out on knob

Apr 27, 2015 | 2009 Cadillac Escalade ESV

1 Answer

Fog lights staying on


fog light switch defective

Mar 19, 2014 | 2004 Cadillac Escalade Esv

1 Answer

How to remove driver side fog light on a 2004 cadillac escalade


Obtain a Hayne's manual from AutoZone. They go into great detail on those projects.

Apr 30, 2012 | 2004 Cadillac Escalade

1 Answer

How do I replace the fog light? what needs to be removed to access fog lights and side marker lights.?


SECTION 417-01: Exterior Lighting 2000 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 08/27/1999 Fog Lamp Removal and Installation
  1. Raise and support the vehicle. For additional information, refer to Section 100-02.
  1. Remove the aeroshield-to-sub frame screws.
    a0008736.gif
  1. Remove the seven screws and remove the aeroshield.
    a0009383.gif
  1. Disconnect the fog lamp assembly electrical connector.
    a0011782.gif
  1. Remove the fog lamp assembly.
    1. Remove the screws.
    1. Remove the lamp assembly.
    a0011783.gif
  1. To install, reverse the removal procedure.

2010&c18=modelyear&c20=n161420&c35=wsm%2cfog%20lamp%2csyh%2c417-01%2cremoval%20and%20installation&s=1249x702&c=32&j=1.3&v=y&k=y&bw=910&bh=359&ct=lan&hp=n&[aqe]

Mar 05, 2011 | 2000 Mercury Sable

1 Answer

How to change out D1S HID headlight replacement 2007 Cadillac Escalade


open the hood of your Escalade, unscrew the mounting screws on the top of the headlight assembly

slide the headlight forward

unplug the electrical connector from the back of the head light

Turn the headlight counterclockwise and remove it from the housing assembly

Install the new HiD headlight, installation is the reverse of removal

hope this helps
Steve

Mar 03, 2011 | 2007 Cadillac Escalade Two-Wheel Drive

1 Answer

How do you replace the fog light bulb on 2008 avalanche


    • 1 Open the hood and reach down into the engine bay for the fog light assembly. If you cannot reach the fog light assembly from the top you may need to get underneath the truck to reach it. Remove the electrical plug running to the fog light ballast.
    • 2 Remove the bulb. Unlock the fog light bulb by turning it counterclockwise and pulling it straight out of the assembly.
    • 3 Slide a new bulb into the fog light assembly. The part number you will need for the new bulb will be located on the ballast or base of the old bulb.
    • 4 Turn the bulb clockwise to lock it into the fog light housing.
    • 5 Reconnect the electrical connector to the bulb ballast.

Jan 23, 2011 | 2007 Chevrolet Avalanche LTZ

1 Answer

HOW DO YOU CHANGE THE BULBS OF THE FOG LIGHTS?


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2002 GMC Yukon XL

1 Answer

How do u change a bulb in the fog lights on a


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2003 Ford Focus

1 Answer

Replace fog light bulb for 2006 Honda Odyssey


Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.

Nov 22, 2009 | 2006 Honda Odyssey

1 Answer

Installing new fog/driving lights on an 03 mustang. there are wires attached to the fake switch on the dash. Is there a plug somewhere that I just plug into the fog light bulb?


the fog light is normally one complete assembly that you just unplug from the outside and replace with a new one auto zone is a good place to help with this

Jan 11, 2009 | 2003 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...