Question about 1994 Toyota Corolla

1 Answer

After installing an FM radio, dashboard light went off. I have tested all fuses and brightness control of dash light. Everything is okay. In fact, the test of the brightness control knob shows that current reaches the control knob. Still I can't figure why the dash light is off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 733 Answers

Unplug the radio harness and try the dash lights. if they work, then there is a wire that is connected incorrectly. sometimes the harness has an illumination wire that can cause problems like this.

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

For expedition 99, my dashboard light doesn't work anymore, I've tried finding what fuse to replace but unable to locate problem.


There are two fuse's , one is in the under hood fuse /relay center or as ford calls it Battery junction block and one in the central junction block Blown fuse(s): Battery junction box (BJB) Fuse 6 (15A) and central junction box (CJB) Fuse 18 (5A ,on the lids are the # locations .Are you saying that nothing lights , radio, heater controls , back lighting for the instrument cluster . No check engine light, or any other warning lights . Do all the gauges work ? CJB is located left side of dash . Check the fuse's ! 25309735-p0bbf4gezpmb21wjojjnal1o-3-3.gif

Dec 06, 2014 | Ford Expedition Cars & Trucks

1 Answer

Heating and air control does not come on when truck is started. after the engine runs, it will come on for a few seconds; then, it will go off..and stay off...and for some reason dash board lights do not...


sounds like you may be haveing issues with blower motor its trying to go out all together
  • Locate the knob or dial that controls the brightness of the dashboard lights. If the control is not immediately evident, check your owner's manual.
  • 2 Make sure the brightness control is turned on. If it is and the lights aren't working, the problem may be a bad fuse.
  • 3 Check the fuse that controls the dashboard lights (see How to Fix a Faulty Car Fuse). Replace the fuse if necessary.

  • Dec 12, 2010 | 1989 Chevrolet C/K 3500

    1 Answer

    All dashboard/ center console lights out.


    Test the dash first. Put key in hold down trip reset botton. Turn the key to on but don't start. Release the trip botton. Should turn on all dash lights & check for codes in the odometer. If getting codes reply back.

    Feb 11, 2010 | 2004 Dodge Caravan

    1 Answer

    Speedometer, gas gauge and instrument lights stopped working but radio and tach work fine. defroster fan runs on high and can not be turned off because no buttons on the dash work. car runs fine.


    First use a test light and check all fuses. Then check and make sure brightness control is up all the way for the dash lights. If everything there is fine check under the dash for all ground connections and make sure they are clean and tight. If all this is good you need to check the headlight/dash lights switch. If it is okay then you have a problem in the dash itself and the instrument panel will have to be removed and the wiring and printed circuits checked.

    Nov 01, 2009 | 1992 Cadillac DeVille

    2 Answers

    Dashboard lights not illuminating.


    CHECK DASH LIGHTS FUSE.THE GUY WHO PUT RADIO IN PROBABLY FORGOT TO HOOK UP YOUR RADIO ANTENNA LEAD.GETTING NO RECEPTION WILL CAUSE STATIC.

    Sep 16, 2009 | 2002 Honda Passport

    1 Answer

    1998 pontiac sunfire


    As for your dash lights, and electric locks, check your fuses. If the blue high beam light on your dash comes on, but the headlights don't get bright, your bulbs have burnt out, and need to be replaced. They probably went one at a time, but you didn't notice until the second one went. If the high beam indicator isn't coming on, it's probably your switch.

    Jun 17, 2009 | 1995 Ford Explorer

    1 Answer

    Dash and shifter lights in 1996 jeep cherokee wont light


    Hello and welcome to FixYa . Locate the dial that controls the brightness of the dashboardlights. If the control is not immediately evident. Make sure the brightness control is turned on. If it is and the lights aren't working, the problem may be a bad fuse. Check the fuse that controls the dashboard lights Replace the fuse if necessary. If just one part of the instrument panel is not lighting up, then you have either a burned-out bulb or a wiring problem.

    Passenger side kick panel fuse breakdown for a 1996 jeep Cherokee Country

    01 - 25A Rear Wiper/Washer
    02 - 15A Radio, Cigar Lighter
    03 - Empty
    04 - 15A Passing Light
    05 - 30A Blower Motor
    06 - 30A (Circuit Breaker) Power Windows
    07 - 02A ABS
    08 - 20A Turn Signal Flasher
    09 - 10A Radio/Clock Memory, Courtesy Lights, Glove Box, Cargo, Dome Lights, Telltales
    10 - Empty
    11 - 25A Headlamp Delay Module, Horn
    12 - Empty
    13 - 20A Power Door Locks
    14 - Empty
    15 - 15A Instrument Panel Lamps, Clock/Radio and Memory, Headlamp Switch, Parking Lamps
    16 - 30A (Circuit Breaker) Power Seats, Trailer Tow
    17 - 7.5A Instrument Cluster Gauges, Headlamp Delay Module, Chime Module, Overhead Console
    18 - 25A Rear Defrost
    19 - 05A Instrument Panel Lamps, Radio Illumination
    20 - 5.5A (Circuit Breaker) Windshield Wipers and Washers

    This should get you going. And you can always Ask Me.

    Apr 27, 2009 | 1996 Jeep Grand Cherokee

    2 Answers

    Dashboard lights wont come on


    you could have fried a wire take a es ligh and pull the dash apart and test were the balbs go in oher wise check check the balbs they could have went out

    Apr 17, 2009 | 2000 Hyundai Accent

    1 Answer

    New radio installed - now dash lights don't work


    Most factory stereos are wired to the dash dimmer switch. Usually if the dash lights go out after an after market stereo installation, it is because the wire that originally went to the factory stereo is not used for after market stereos. Double check the fuses and ensure the wire that controlled the lights on the factory stereo is not grounding out on something.

    Nov 11, 2008 | 1998 Honda Passport

    1 Answer

    Dash lights


    From the dashboard. 2 days prior to this my Airbag light fuse went out, I replaced it and now it works fine again. I am not sure if they have anything to do with eachother.

    Oct 14, 2008 | 2005 Jeep Liberty

    Not finding what you are looking for?
    1994 Toyota Corolla Logo

    177 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8522 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...