Question about 1995 Jeep Grand Cherokee

1 Answer

My 95 JGC's security system will not let me start the engine. Just clicks!

Posted by on

  • Vegas95 Jul 12, 2010

    Thank you for helping.

    I tried the key and it did not work!



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 1,757 Answers

Are your head lights blinking on and off? I had the same problem on a 96 JGC last week after working on it. The headlights just continue to blink with no start after reconnecting the Battery.
Stick your key in the Drivers Door Lock and Turn to "Lock" and then to "Unlock" (or vice versa). This will stop the Security System and allow you then to start your Jeep.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Posted on Jul 12, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

95 jgc starts then stalls

Take it to a properly qualified and licensed mechanic you know and trust.

Nov 10, 2013 | Jeep Grand Cherokee Cars & Trucks

2 Answers

I have a 95 mercury sable and when i try to start it the check engine light comes on and it starts clicking inside the car and under the hood it will not start

possible alarm - security system issue ?
If the battery is low or has a bad connection, the starter will make the electrical system pulse.

Jun 29, 2012 | 1995 Mercury Sable

1 Answer

How can you bypass the factory alarm so you dont have to double click your remote to start the car. They sell a bypass for your 95 regal factory security system.
On the left side of the site it says. PRO VATS full bypass. Thats the thing you need to bypass the factory security system.

Mar 30, 2011 | 1995 Buick Regal

1 Answer

Can I directly replace a 95 JGC 4.0L transmission with a 96 JGC 4.0L transmission?

Of course yes.

They are the same entirely. Just for some little things that are not issues.

Good luck dear.

rate this solution, please.

Aug 12, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Will a 96 JGC 4.0L transmission directly interchange with a 95 JGC 4.0L transmission?

Physically they will but you didn't say if auto or stick...Just be sure that any electrical connections and linkage are a match.

Aug 12, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Will a 96 JGC 4.0L transmission transfer directly to a 95 JGC 4.0L?

They should be a direct bolt up. The "ZJ" were from 1993-1998

Aug 11, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1998 JGC Quadra Drive problems

Is there any oil in it? Sounds like your valves were sticking until it completely fried everything.

Jun 17, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Steering wheel play

Try reaccomplishing the bleed procedures and that should help your problem!

  1. Fill the steering pump with fluid. Operate the engine until it reaches normal operating temperature, then stop the engine.
  2. Turn the wheels to the full left and full right position to circulate the fluid. Add fluid to reservoir to maintain full level. Start the engine. Check the fluid level and add if necessary.
  3. Purge the system of air by turning the wheels from side-to-side without going to the full left or right position.
  4. Return the wheels to straight ahead position and operate the engine for 2-3 minutes, then stop the engine. Add fluid necessary. Road test the vehicle.
Please don't forget to rate!!!

May 22, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Blow-By issue....

your piston rings are wore out. engine needs to be rebuilt. sorry.

May 11, 2009 | 1995 Jeep Grand Cherokee

4 Answers

Changed battery and no remote control

you may need to call a dealership and ask them about it they are most familiar with their systems and can tell you how to shut it off and possibly tell you how to keep it disarmd

Aug 18, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

83772 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides