Question about 1993 Oldsmobile Cutlass Supreme

2 Answers

Brake and turn signals not working

I have a 93 cutlass supreme convertible, the brake lights and turn signals don't work, the middle 3rd brake light works, and the running lights work. fuses are good,and the bulbs are good.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 524 Answers

Hi

this may be because of the following reasons.

1.there wil a junction box/relay which connects bake light and turn signal may be damaged or connections from this may be disconnected.check it.
2.the wire connecting this relay may be damaged so no power going to the junction box/relay.
3.wire from the battery terminal disconnected

uf you feel my answer was useful please rate me

Posted on Jul 12, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

Usually this indicates that the brake light switch or turn signal or flasher have failed.i would start by replacing the brake light switch located on the upper area of brake pedal and fix ya problem. 

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights don't work on 83 cutlass supreme


I assume you checked the bulbs and they were good? It's possible that the sockets have gone bad and need replacing. The tail lights are fused through the instrument panel lights. that fuse should be in the middle of your fuse box, marked "instr". If the fuse is good check to see if the dash lights come on when you turn the headlight switch on. If they don't then change the headlight switch. hope this helps.

Mar 12, 2012 | 1983 Oldsmobile Cutlass Supreme

1 Answer

The brake lights do not, however the 3rd brake light turn signals work


check brake lights relay--probably in engine compartment fuse box.

Please see my tip at http://www.fixya.com/cars/r6053280-lights_out_lights_not_out_bulbs_ok and let me know if you have questions.

Sep 24, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Have a 96 Olds Cutlass Supreme, brake lights will not work. We've replaced bulbs, fuses and brake light switch and still nothing. Help!


Try having someone push on brake pedal at the same time thay move the turn signal lever up and down slightly to see if your brake lights work this would tell me that you have a faulty turn signal switch because GM runs the brake lights thru the turn signal switch so they work if you are driving with your 4way flashers on.

Jun 06, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

3 Answers

My 1997 olds cutlass supreme sl brake lights are intermittent,sometimes they worl and somtimes not.The 3rd and center light works fine.I replaced the brk lite switch and still have the same problem.Has...


Try having someone watch ur lights as you tilt the steering wheel in different positions and pressing on the brake in each tilt position. Sounds strange but the brake light go through teh wiring in the steering column. I drive with my wheel tilted higher than normal to keep BOTH brake lights working.

Feb 12, 2010 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Hazard/turn signal switch


need to replace the whole switch/stick at steering column.

Jun 03, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1995 cutlass ciera stop light and third light don't work


THE 3RD BRAKE LIGHT DOES NOT GO THROUGH THE TURN SIGNAL SWITCH.ASSUMING THE 3RD BRAKE LIGHT BULB IS GOOD.U SHOULD CHECK THE BRAKE LIGHT SWITCH ON THE BEAKE PEDAL.SHOULD BE POWER GOING IN & POWER OUT WHEN U ARE IN THE BRAKE

May 13, 2009 | 1995 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Oldsmobile Cutlass Supreme Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...