Question about 2000 GMC Jimmy

1 Answer

Need to change the clock in my jimmy and dont know how,,theres no manuel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 6,826 Answers

I found this solution already was answered by: chavezemail
Rank: Wiz need to change the clock in my jimmy and dont know - gmc.gif Expert
Rating: 87%, 24 votes
Owners manual: 3-10:

Setting the Clock for Systems with HR and
MN Buttons
Press and hold HR until the correct hour appears on the
display. Press and hold MN until the correct minute
appears on the display. To display the clock with the
ignition off, press RECALL or HR/MN and the time
will be displayed for a few seconds. There is an initial
two-second delay before the clock goes into the
time-set mode.

Setting the Clock for Systems with
SET Button
Press SET. Within five seconds, press and hold the
SEEK right arrow until the correct minute appears on
the display. Press and hold the SEEK left arrow until the
correct hour appears on the display.

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Can I use a 97 GMC Jimmy brake booster to replace a 98 GMC Jimmy brake booster? I'm buying a vehicle and need this part but found a 97 way cheaper than the 98 and they look the same! TIA


I don't if that differs between manufacturers? I looked at rockauto.com for your brake booster, cardone part for your vehicle lists 97--2005 for your vehicle, brake booster.
If all the hook-ups are the same as the one your looking at, I don't know why it wouldn't work?
You know how it is, I see nothing from here.

Oct 09, 2016 | GMC Cars & Trucks

1 Answer

How can i change my clock?


Try www.manualowl.com for free PDF Very informative.Jimmy

Apr 11, 2012 | 2001 Mazda 626

1 Answer

Hello, My 2001 GMC Jimmy (SLE) has a loud sqeeking noise on the front left wheel. I dont know that is causing this. what is causing this!


hi its possible that your front disc pads are low & need replacing specialy if noise changes when brakes applied

Sep 11, 2011 | 2001 GMC Jimmy

1 Answer

The jimmy cant not starte


I need more info. Does it not turn over? Does it turn over but not start? Does it try to start? It could either be electrical or a fuel problem. You have to know which. When you turn the ignition on, (when the dash lights and gauges come on), listen for the fuel pump to cycle (run), if not check the fuses and or relays. Your owner's manuel in the glove compartment should tell you which fuse it is. If the pump cycles check the pcm or ignition fuse. Then you have to go from there. If no spark to the plugs it could be a coil, crank trigger, etc.

May 30, 2010 | 2000 GMC Jimmy

1 Answer

On my 1997 jimmy 4x4,will not shift into 4weal drive, high or low never done this before.


is it electric push button
if so its a sensor on the transfer case an or one of the wheels.....
if its manuel then the main shaft is striped....
or its seezed under your jimmy an dont wanna shift

Jan 04, 2010 | 1998 GMC Jimmy

1 Answer

93 Jimmy Electronic 4 Wheel Drive


If the Blazer is the same Year. I think the years are 1992 to 1994 will work as long as it's the 4L60E, and you have the manuel transfer case to activate the 4WD.
Good luck and keep me posted.

Jun 03, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

I cant find the oil filter on my jimmy


At the very front, under front bumper of skid plate, there is a small drop down panel, filter is behind that.

Mar 30, 2009 | 1999 GMC Jimmy

1 Answer

95 JIMMY HOW DO I SET THE CLOCK


as I recall you have to turn it off and hold in the set button and then it will start to flash and you use the seek and scan buttons to change it. Don't quote me on it, but I do know the power has to be off and you hold in one of those darn buttons.

Feb 20, 2009 | 1998 GMC Jimmy

2 Answers

Set digital clock


There are two depressions just under the clock, pressing one with a ballpoint pen changes the hours, the other changes the minutes

Jul 29, 2008 | 2000 Renault Sportwagon

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...