Question about 1983 Ford Bronco

1 Answer

My 1983 bronco with a 302 is smoking out the dip stick vavles and distributor, also lost horse power and dont want to move very well, it still has oil pressuer and does not over heat, no oil mixture in with antifreeze. started doing this 2 weekes after i replaced the carburator that came off of another 302 bronco, and i capted off some of the vacuume hoses, the valve air breather filter did fall apart and i was thinking if it clogged my valves. what could it be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Blow by comes from improper ventalation of the engine,or a broken compression ring or crack in a piston.Or a valve stuck open,or broken valve spring causing the ventalation to come up threw the engine crank case.Check for a broken valve spring,and hope the valve spring has not hit the piston.Rate if you would,and thank you.

Posted on Jul 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What was the origanal 1983 bronco motor?


different engines were put in depending what you orded 351 Cubic inch 302 Cubic inch and a 6 cylinder not sure of cubic inches

Nov 26, 2010 | 1983 Ford Bronco

1 Answer

What is the spark plug firing order for a 1989 Ford Bronco with a 302 Cu. In. V8 engine?


There are three kinds of 302s made from 1982-2001. 5.0L HO This engine was used in 1983-1995 Mustangs, Mark VII Lincolns, and some T-birds and Cougars. All Explorer 5.0L engines are 5.0L HO engines as well. They use the 351W firing order, 1-3-7-2-6-5-4-8. Except for the 1983-84 Mustangs, all of these engines are roller cam equipped. They use a reverse rotation water pump and front cover. The 1994-5 Mustang and all Explorers use a unique front cover and water pump. 5.0L Full Size Car This engine was used in 1982-1990 Crown Victoria and Grand Marquis. They use the 289-302 firing order, 1-5-4-2-6-3-7-8. Most of these cars are not roller cam equipped, however sometime in the early 1990s they started using roller cams but retained the 302 firing order. They use a standard (clockwise) rotation water pump and front cover. 5.0L Truck (except Explorer) These engines are similar to the Full Size Car engines, except they use different intake manifolds and camshaft profiles. They also use the 289-302 firing order, 1-5-4-2-6-3-7-8. They also began using roller cams sometime in the early 1990s. They use a reverse rotation water pump and front cover.

Good Luck

Nov 12, 2010 | 1989 Ford Bronco

2 Answers

1983 ford bronco 302 engine wont stay running after jumped


keep in mind, your engine use both source of power to run, one from the battery and one form alternator. If the alternator is good, your engine should stay running regardless if the battery is good or bad, the alternator should keep the engine running. It sound like to me the alternator is faulty not charging your battery or keeping your engine running, even though the alternator is brand new does not mean is good. My guess I would take the alternator back and get another one. the reason why your car ran for 25 min and die it has no source of power to keep the sparks going although the alternator should keep the engine running and at the same time charging the battery but is not.

Jul 12, 2009 | 1995 Chevrolet Caprice

1 Answer

My Bronco is stuck in reverse


Make sure your emergency brake cable hasn't seized up. Some vehicles use reverse to adjust the brakes. Try moving the vehicle with the clutch pushed in, then with the clutch out to make sure it is not sticking, check your shifter linkage to make sure it is not bent or sticking.

May 09, 2009 | 1986 Ford Bronco II

1 Answer

Want to remove computer from 1983 bronco ll


there was no distributor that wasn't solid state, they were Duraspark system (to late 1985 model year, no computer) and then TFI system, sorry.

Mar 27, 2009 | 1983 Ford Bronco

1 Answer

Lost power and smoking from transmission


i would say your head gaskets gone, you'll need a compresion test done to confirm it.

Jan 08, 2009 | 1992 Lexus Ls 400

1 Answer

GMC Vandura 1983 6.2 litre diesel automatic transmission oil GMC Vandura 1983 6.2 litre diesel automatic


Your dip stick tube is your fill tube for your transmission . Make sure your transmission oil is at opperating temp before servicing some instructions are written on the dip stick , Use a small funnel , Add a little at a time (cup). Use the proper fluid , check regularly

May 18, 2008 | 1989 GMC Dura

Not finding what you are looking for?
Cars & Trucks Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...