Question about 1996 Ford Explorer

1 Answer

I have a 1996 ford t-bird and it runs bad under moderate to heavy acceleration.it dosnt have any codes eather. what chould i do to fix this problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 130 Answers

Start with regular tune ups then if your engine is fully tuned up and you still experience driveability problems then you would try to troubleshoot the fuel,ignition and engine control systems.i suggest you change the fuel filter first if you haven't already,and check the air filter looking for fuel leaks while you do.

Posted on Jul 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 96 ford bronco runs rough on acceleration,idles fine. Runs good under light acceleration but if hit the gas hard runs bad and pops. Changed fuel filter no change.what next?


givit a tune--new distributer cap--new plugs and cables--------also have air intake cleaned plus idle control--use a nonchlorinatd solvent sold a napa etc

Jul 22, 2014 | 1996 Ford Bronco

1 Answer

1996 crown victoria misfiring loss of power under light to heavy acceleration, rough idle


The plug wires on this model year and prone to burn through, replace them all, do one at a time and always put them back in the factory wire looms they run through, that is very important, replace any you may break. Use high qyuailty oplug wuires foractory parts are preferred..

Jun 07, 2013 | 1996 Ford Crown Victoria

1 Answer

96 honda accord misfire under hard acceleration


has it had a tune up. spark plugs ,wires and rotor and distributor cap. Are there any codes on

Oct 30, 2012 | 1996 Honda Accord

1 Answer

Thunder bird 96 will not run will run for a little bit when carb cleaner sprayed intointake manifold


Check ford recalls, they had a recall for the intake manifold on the 1996 t-birds. Ford replaced no charge.

Feb 27, 2011 | 1996 Ford Thunderbird LX

1 Answer

K2500 chevy 3/4 ton pick up. no power under load


IN your distributer under the rotor is a magnet and a pickup coil (the magnet is known as a pole piece) check your pickup coil for corrsion (green in color) and the module and also check pole piece for cracks in the magnet where the rivets hold it together. sometimes oil wicks up around the distributer shaft because of housing wear or the pieces just wear out over time.

May 16, 2010 | 1999 Chevrolet K2500

1 Answer

1996 ford falcon wagon,automatic, gli 4.0, ef 6cyl, starts somedays then other days wont start ive been leaving the key on for about 10 to 15 mins then starting it, i put it in the garage to get fix he...


the most common problem is dirty connections eather at the battery post or in the cables coming off the battery going to ur starter. currosion builds up in the cables and when it heats up it dosnt allow enough volts to start it. hope i helped

Nov 17, 2009 | 1996 Ford F250 Crew Cab

1 Answer

1994 LT1 Engine "balks" under acceleration intermittently


Your fuel pump or your catalytic is plugged. have it tested with a infrared gun it will tell you if the cat is bad and if it is replace it test the fuel pump for fuel rail pressure it should read 50 psi then hold to 20 psi for 1 minute.. Also check to see if the intake plate is dirty and if it is do a top engine clean, buy GM's top engine cleaner and run it threw the engine, if you have carbon buildup the compression and cause the car to run bad and the knock sensor will not be able to adjust time. I know this sounds silly but these three things will cause your problem and so will a bad fuel filter.

Jul 22, 2009 | 1994 Chevrolet Corvette

1 Answer

Loss of power on acceleration. engine bucking.


check transmission fluid.change fuel filter and air filter.try changing up on where you buy gas .because bad gas causes problems.

Jun 26, 2009 | 1999 Ford Taurus

1 Answer

96 ford T Bird obd codes


It would cause codes but not transmission shift problems

Mar 28, 2009 | 1996 Ford Thunderbird LX

1 Answer

1996 Crown Vic, Valve noise under heavy acceleration


No use what's in there, but have the engine de-carboned by a Ford dealer, or remove the octane adjust shorting bar located near the ignition module (retards timing 2 degrees), this will in most cases cure the issue unless there is allot of carbon in the cylinders. There are also methods of ing this de-carbon procedure at home, check on the internet for tips.

PLEASE RATE THIS SOLUTION

Oct 22, 2008 | 1996 Ford Crown Victoria

Not finding what you are looking for?
1996 Ford Explorer Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...