Question about 2007 GMC Acadia SLE
Posted by Anonymous on
You will need to take the tire off of the side that the light is burned out on. Then remove plastic fender well insert. This will give you the enough room to change out any burned out light in the headlamp assembly.
Posted on Jul 27, 2010
Take the top 2 screws out of the headlight lens assembly and if you take the 6 top screws out of the upper grill this is cake work. Even the manuals didn\'t help so don\'t get mad if I am posting mad. Ii figured it out by myself AND I have big hands. 08 Chevy Avalanche
Posted on Apr 20, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On the inside of the car next to the light switch there is your dome button. GM made it to where you could turn off the daytime running lights by pushing it three times in and out. Turn the vehicle on then do this. Your daytime running lights should work after this.
Posted on Dec 14, 2008
Open the hood, and in the top right and left corners of the primary headlamps you'll see two pins (L shaped) swing them out (towards the front of the truck) and lift out. This allows you to remove the upper headlamp assembly. You can then remove the lower assembly by pushing outwards on the plastic clip that is hooked into a metal clip. Once it's out you just turn the bulb to remove it.
It's much easier if you unhook the leads to the upper assembly's bulbes so you can set the whole thing aside.
Posted on Mar 31, 2009
first you have to lift the hood then remove the headlight pins and then stick you're hand down on the left side push the clip in and gently pull the housing out then push the white clip andturn the housing counter clock wise and pull out
Posted on Jan 11, 2009
the lights are controlled by a module, it is the DRL module, replace it. also try this
On the inside of the car next to the light switch there is your dome light button. GM made it to where you could turn off the daytime running lights by pushing it three times in and out. Turn the vehicle on then do this. Your daytime running lights should work after this.
Posted on May 14, 2009
Tips for a great answer:
Feb 13, 2016 | Buick Cars & Trucks
Aug 05, 2013 | 1996 GMC Suburban
Aug 10, 2011 | 2000 Volkswagen Beetle
Nov 01, 2010 | 2002 Honda Accord
Apr 25, 2010 | 2004 Honda Civic
Dec 24, 2009 | 2005 GMC Yukon Xl Denali
Nov 19, 2009 | 2002 Nissan Pathfinder
Oct 24, 2009 | 2003 GMC Sierra 1500
May 14, 2009 | 2005 GMC Yukon Xl Denali
2,044 people viewed this question
Usually answered in minutes!