Question about 1997 Pontiac Grand Am

1 Answer

Need to know the size of the socket needed to remove the front hubs on a dodge ram 3500 1 ton 4 x 4 with cummins engine?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

Removing Tie Rod End Attaching Nut Nut is to be removed from tie rod end using the following procedure, hold tie rod end stud with a 11/32 socket while loosening and removing nut with wrench Removing Tie Rod End Attaching Nut
Remove the tie rod end from steering knuckle arm, using Remover, Special Tool MB-991113 Tie Rod End Removal From Steering Knuckle .
Remove the upper ball joint stud from the steering knuckle using Puller, Special Tool, C3894-A Ball Joint Stud .----------------------- The procedure is :-- Do NOT pound on the outside of the hub. First you will need a 5 inch long half inch drive socket extension. Start the 4 hub bolts about half way, then witha helper hold the extension between one of the 4 bolts and the axle housing then have the helper turn the steering wheel to push on the bolt and hub. If it is really rusted in you might have to start the truck to get more pressure on it while turning. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a wiring diagram for a 1997 Dodge RAM 3500 diesel pickup?


1997 3500 Wiring Diagram - Dodge Diesel - Diesel Truck Resource Forums

www.dieseltruckresource.com/...dodge-ram.../1997-3500-wiring-diagra...
Jan 24, 2011 - Hey guys, I'm working on a 97 3500 that's had the bed removed and replaced with a flatbed. There is the biggest mess under that truck wiring wise and. ... 2007 Ram 3500 A/C compressor wont engage, need wiring diagram ...

Dodge Wiring Diagrams / Schematics - YouTube

? 1:13
https://www.youtube.com/watch?v=UI6_vhCHFYU
Nov 19, 2013 - Uploaded by Robert Nauert
Dodge Wiring Diagrams / Schematics ... Nitro, Power Wagon, Ram 1500, Ram 2500, Ram 3500, Ram 4500 ...

1997 Dodge Cummins - Full color wiring diagrams - 12 Valve ...

forum.mopar1973man.com/.../1638-1997-dodge-cummins-full-color-wi...

Jan 01, 2016 | Dodge Cars & Trucks

1 Answer

Cannot remove rear half of front hub on 2007 Dodge ram 2500 4X4, 4 mounting bolts already removed, front half oh hub removed


OK I have one of these trucks and those hubs are a pain in the buttt big time. Tried changing an axle joint but couldn't get the hub off. Finally after 2 days gave up and took the truck to the dealer. I watched them take it apart. There is a special tool. Put the four bolts back into the hub from the axle side. They should all be loosened but not out of the hub. Take a deep socket that fits the bolt head. Fill the socket with nuts so that you can just fit the hub bolt head in it too. with the axle on stands and both front wheels in the air, the socket on one of the bolts. ( not sure how to get the socket to stay on, maybe a few wraps of tape around the head of the bolt) start the truck and turn the wheels, lock to lock. Get out move the socket to another bolt on the other side and repeat. when youve done all four bolts this way , take all bolts a few turns ( equal distance) and repeat the process. The hub will be pressed out by the socket pushing against the axle tube. At least that's what they did at the dealership.Good luck. Let me know how it works.

Jun 10, 2012 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

How to remove front hub on 2007 dodge diesel


Check out the cummins diesel forums..they have great help and often step by step details with photos. I use them a lot.

May 31, 2010 | 2007 Dodge Ram 3500 Quad Cab Laramie

2 Answers

I need the procedure for changing the head gasket on a cummins b engine in a 1995 dodge pickup


Sorry you are having trouble.
This is a major under job. You did not specify the engine size.
A manual will be a great help to you but I will tell you the basics
Remove the exhaust from the head (difficult)
Remove the intake manifold(difficult)
Remove everything else connected to the head(difficult)
Remove head(easy)
Install new gasket (easy)
Put it all back together
I hope this helps

Apr 04, 2010 | 1995 Dodge Ram 3500

1 Answer

Sprak plug Wires Need To Be Installed Correctly


You have several RAM sub-models in here:
Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} B1500 RAM Van
B2500 RAM Van
B3500 RAM Van
RAM 1500 1/2 ton 2WD
RAM 1500 1/2 ton 4WD
RAM 2500 3/4 ton 2WD
RAM 2500 3/4 ton 4WD
RAM 3500 1 ton 2WD
RAM 3500 1 ton 4WD

Chrysler Full-Size Trucks 1989-1996 Repair Guide
To avoid confusion, remove and tag the wires one at a time for replacement.


f160dd3.jpg


Fig. 1: 2.5L 4-cylinder Engine. Engine Firing Order: 1-3-4-2. Distributor Rotation: Clockwise


a1a8242.jpg

Fig. 2: 3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise


dc6748e.jpg

Fig. 3: 5.2L and 5.9L V8 Engines. Engine Firing Order: 1-8-4-3-6-5-7-2. Distributor Rotation: Clockwise


832c92e.jpg

Fig. 4: 8.0L V10 Engine. Engine Firing Order: 1-10-9-4-3-6-5-8-7-2. Distributorless Ignition


Hope helped with this (remember rated this help) Good luck.

Nov 06, 2009 | 1996 Dodge Ram

1 Answer

I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


8–Stud Rotor
  1. Raise and support the vehicle.
  2. Remove the wheel.
  3. Remove the hub extension.
  4. Remove the brake caliper assembly.
  5. Remove the axle nut cotter pin. Remove the axle nut.
  6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
  7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
  8. Remove the bolts and remove the hub/bearing assembly.

Sep 16, 2009 | 2000 Dodge Ram 3500

1 Answer

2007 dodge ram 3500 5.9 liter cummins diesel 2WD tie rod end repa


try moving the ends of the tie rod. there should be a metal sticking out of the rubber ball like part at the end. A worn out tie rod would be easily moved with bear hands while a new one will take some muscle.

Jun 30, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

1999 dodge cummins 2500 front axel seals


you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

1 Answer

Need part # for fan bearing assembly on 2003 ram cummins 3/4 ton. Bearing went out. Also is this a press in bearing?


Hello travis...The second generation Rams used Cummins part #3910739 a double row angular seated sealed bearing for the fan hub. Cummins is proud of it, indicitive of it's price. If you can remove your old bearing from the outer race there will be a part number on it. Your local bearing supply house can cross it over. Do not try to install the bearing with something that could side load the bearing such as a hammer and drift, the result will be premature failure. Recommend useing a shop press to install new bearing. Good luck...i hope this helps.

Jun 04, 2009 | Dodge Pickup Cars & Trucks

1 Answer

Change wheel bearings in a 2005 Dodge Ram 3500 4WD


Go on the Dodge Ram and Cummins forums...they have tons of help....just google them

You can also get a free service manual for it at pdftown.com

Mar 21, 2009 | 2005 Dodge Ram 3500

Not finding what you are looking for?
1997 Pontiac Grand Am Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...