Question about 1995 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: vss for honda accord 95
there is a ten millimeter bolt holding it in remove this then depending if you have a factory or afterrmarket replacement you may have to remove the three tourqe scews fom sensor and replace just the electrical portion of the swith and reuse the shaft. Be sure to lubricate the shafts oring before reinstalling and double check to makesure the sensor is seated before installing the ten millimeter bolt. this can some times be tricky because the gear on the sensor doesnt mesh eith the gear in the diff just rotate the sensor side to side if this happens until it bottoms out
Posted on Feb 01, 2009
The door panel is held on by plastic clips.. first check behind the door handle and see if there are bolts or screws there. then start on the bottom and pry the panel loose starting on bottom of panel and then going up the sides with a flat blade screw driver. once you have gotten sides and bottom loose pickup on the door panel to release it from the window ledge this is how the top is held in place.. holler if you need more info .. Jerry
Posted on Apr 27, 2009
SOURCE: Honda Accord Windows Replacement
its a common thing that the switch breaks down.Changing the switch would have been the best option.No you cant get wind down windows for that car.But you can get them for the rover 200 series and they are basically the same.But its going to cost you more than windows and switches to have the doors changed and spray painting.Good Luck.Phil
Posted on May 30, 2009
If you take the door panel off which there is only 2 to 4 screws holding in on and some clips in the back. pull the window to the top of the door and tape in place pull the track up and line track up with the window fully up and make sure to tighten track bolts on both the window and door bolts. hope that helps
Posted on Dec 11, 2009
Tips for a great answer:
Mar 07, 2012 | 1993 Honda Accord
May 27, 2011 | 1995 Honda Accord
Oct 01, 2010 | 1995 Honda Accord
Apr 29, 2010 | 1996 Honda Accord
Dec 12, 2009 | 1990 Honda Accord
Dec 10, 2009 | 1996 Honda Accord
Dec 06, 2009 | 1995 Honda Accord
Sep 06, 2008 | 1995 Honda Accord
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: