2000 Chevrolet S-10 Logo

Related Topics:

Anonymous Posted on Jul 11, 2010

2000 chevy s10 blazer 4-3ltr w cranks won't start has no injector pulse. Fuel pressure measures 60lbs(new A/C pump)sercurity system passes all Tec2 tests, no dtc's. whats next???

  • 1 more comment 
  • Anonymous Jul 12, 2010

    Changed the crank sensor still won't start! I thought I was smarter than this! Help me keep my sanity, this is driving me crazy and to top it off its my brother in laws truck, Its not even mine!

  • Anonymous Jul 13, 2010

    Tried that too as per GM manual! A match and a can of gas would fix the problem.

  • Anonymous Jul 13, 2010

    Got lucky yoday, he towed the car to chevy, yea he finally got the hint! Thanks for your help I really appreciate you trying. When I get the result I'll let you know.

×

1 Answer

Ronny Bennett Sr.

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 6,988 Answers
  • Posted on Jul 11, 2010
Ronny Bennett Sr.
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 28, 2009
Answers
6988
Questions
2
Helped
2287509
Points
21993

Try spraying starting fluid in the intake,if the truck starts and continues to run,replace the cam sensor,if it does start,but dies,then replace the crank sensor,make sure the crank sensor is plugged up.

  • 1 more comment 
  • Anonymous Jul 11, 2010

    Thank You I did run the truck on starting fluid and it did die when I stopped the spray but didn't think of the crank sensor. I'm going to try that. Thanks. again.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 12, 2010

    Lets relearn the key to the ignition,turn the key on,and leave it for ten minutes,then turn it off,and right back on,do this a total of three times,and 30 minutes,see if it will start after doing this,let me know,I am standing ,well,sitting by.

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 13, 2010

    how about the cam sensor?Have you done anything with it?

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

87 chevy s10 blazer 2.8 has power to all related components but no spray from injectors cranks but wont start

Use a noid light or other tool for checking the injector pulse is present.

If injectors have a pulse when the engine is cranked the reason there is no spray is there is no fuel pressure - fuse, relay, pump, wiring, pipework, filter. Water in the fuel tank is also a possibility.

If there is no pulse it could be crank or cam sensor, fuse, wiring or even the ECU.
0helpful
2answers

07 chevy cobalt 2.2L no injectors pulse!the fuel pump works fine!when I spray starter fluid inside the throttle body & than the want to start...NEED HELP PLEASE!!! LIKE A.S.A.P

Hi,

I would check n replace the fuel filter if needed. Also, it could be one of the spark plugs. Was it running before? Can you think of anything that happened or changed recently?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

1helpful
1answer

2001 chevy blazer Lt 2w Drive 4.3 No Start Condition

Make sure the battery has a full charge.

Are you missing anything besides fuel? Engine cranking visually check for spark at the spark plugs. Also, check for fuel injector pulse. If your missing everything, check for an rpm signal.

With the spider fuel system, start-up fuel pressure can be critical, around 60--66 psi. At the fuel pump connector, engine cranking, gray wire is voltage, black is ground. If good voltage and ground with no fuel pump action, have to suspect the fuel pump.
0helpful
1answer

I have a 1993 chevy s-10 blazer 4.3 vortec 4x4 , Was driving and it just died, when i went to restart it , it wouldn't start, i noticed i didnt hear the fuel pump come on, I did a test and bye passed...

You need to check the crank sensor, this controls tthe injector pulse. If it will attempt to start with alternate fuel but not on its own, it sounds like the injectors arent pulsing, so your not getting fuel. Try the crank sensor first.
0helpful
2answers

2000 S10 no start

I'd use a gage and check proper fuel pressure, key on engine off, 60--66 psi with spider fuel system.
Engine cranking did you visually check for spark at the spark plugs? Engine cranking is there a fuel injector pulse?https://s8.postimg.org/50arofh11/fuel_pump.jpg
Click on the link for fuel pump relay, you can check the fuse. At the fuel pump, gray wire is voltage, black is ground.
0helpful
1answer

My 95 blazer has no inj pulse i did new comp new

Have you checked the fuse(s) for the injectors? Are you getting power to injector connector?
Not finding what you are looking for?

487 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...