Question about 2005 Chevrolet Colorado
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
remove the battery terminals for about 15 mins, that will reset your computer, if you turn it back on and get the same check engine light there is an underlying problem, only certain codes will trigger that light to come on, you'll need to take it to a mech to be sorted sorry to say, hope all goes well for you, matt
Posted on May 15, 2009
If your lucky, your car is still under warranty. If your warranty is over, you can go to Auto Zone and have the car scanned for the DTC codes. The DTC codes will inform you the issues that need to be addressed so you can have your car running 100% again. Note: Auto Zone scan free of charge and can give you the step by step instruction to address the issues free of charge and if there are any parts that need to be replace, there parts price are reasonable and most of the time are life time replacements. Good luck and keep me posted, be glad to help you get your car running 100% again soon
Posted on Oct 19, 2009
Testimonial: "Thank you... I am going there tomorrow!!!"
po455 is Probable Cause[s]
1. Defective, loose or missing fuel cap
2. EVAP canister broke, hose cracked or not connected
3. Purge or vent solenoid defective
4 . Vacuum leak at engine po121 code po121 means Throttle Position Sensor/Switch A Circuit Range/Performance Problem . it is usually indicative of a faulty throttle position sensor or faulty wiring harness in the engine bay.
Posted on Feb 27, 2010
SOURCE: reduced engine power on
The traction control uses the speed sensor in the transmission and the wheel speed sensors to determine wheel spin. If a wheel spins braking is applied to it so that the power can be transferred to the other wheels. At some point the ECU detected a gross disagreement between the sensors and so as a precaution has entered into a limp home mode. On some systems if the fault is in error it can be cleared by putting the car into drive and moving forward a meter, putting in reverse and going a back a meter and doing this three times. If one or other of the sensors are faulty this process will not allow the error to be cleared. You need to check or have checked the error codes and the speed sensors.
Posted on May 28, 2010
Tips for a great answer:
Feb 11, 2015 | 2003 Chevrolet Silverado 1500HD
Jan 01, 2015 | 2006 Chevrolet Colorado
Jun 26, 2017 | 2005 GMC Canyon Crew
Mar 03, 2013 | 2011 Chevrolet HHR
Nov 12, 2012 | 2005 Chevrolet Colorado Crew
Aug 07, 2010 | 2005 Chevrolet Colorado
Jul 05, 2010 | 2004 Chevrolet Colorado
236 people viewed this question
Usually answered in minutes!