Question about Cars & Trucks

1 Answer

Need to put door back together on 68 mustang convertible owner took door apart i have all pieces

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 176 Answers

This will require alot of time. if you have another door with the guts inside of it i would suggest you take the door panel off and look at that. make sure the wing window goes in first. make sure the window felts are good. leave everything loose before you tighten anything. make sure you take off the felt weather stripping on the top of the door or you will have a hard time putting the door glass in. if you need pictures e-mail me at jandjautoworks@bellsouth.net

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"How do I put this back together Door lock latch diagrams"


does it look anything like this , sorry hav'nt got the item list , get a workshop manual if this is not helpful , keep me posted if you wish
np01415.gif

Jun 02, 2014 | 2001 Chrysler PT Cruiser

1 Answer

The passanger door on a 2006 mustang gt convertable was pushed forward and when u open the door it catches the front quarter pannel. So I need to move it back a little bit so it does not catch. ??


take a small piece of wood 1"x 3" x about 4" long and place inside door jam at hinge , slowly close door until it puts pressure on wood,... push door shut gently and remove wood and try shutting door , this is what they call redneck auto body. to do it right you will need to remove hinge and add washers to back side of hinge plate so it moves hinge out thus pushing door alignment back if hinge is welded on add washers to door side where hinges attach to door.

Apr 04, 2011 | Ford Mustang Cars & Trucks

1 Answer

Replaced u joints on 1989 Montero rear drive shaft. Now drive shaft has vibration which peaks around 65 mph. Think I reassembled wrong or bad part(s)? Used Precision not OEM Mitsubishi u joints.


When you took it apart did you "match mark" the joints so that it went back together the same? If not then your driveshaft is probably out of balance. Any driveline shop can correct this. By match marking I mean that you make a mark on each piece of the driveshaft so that when you put it back together the pieces are in the same position relative to each other. If one piece got put back 180 degrees out, it can cause the whole shaft to become unbalanced.

Dec 24, 2010 | 1989 Mitsubishi Montero

1 Answer

I took the rear wheels off to replace the brake pads on my 1995 Ford Mustang GT convertible and I cannot figure out how to get the pads on and it put back together. Help!


The brake caliper pistons have to be turned back in the caliper in order to install the new pads. I would recommend going to the parts store and maybe renting the tool to do it.

Oct 06, 2009 | 1995 Ford Mustang

1 Answer

Putting together the 3 bows for convertible top


Do yourself and your Mustang convertible a favor. Have the top professionally installed. The bows are position sensitive and require adjustment so the top fabric is stretched just right. I had a 66 drop top that needed just fabric and I still paid a pro to do it.

Jan 25, 2009 | 1965 Ford Mustang

4 Answers

2005 Mustang Automatic Shifter


The solution is that you must purchase the complete shift housing because it is all one piece and you can't just replace part of it.The dealer told me this is about $250.00 U.S. and it can be replaced by an intermediate skilled tinkerer. For right now I just live with the inconvenience as I can pretty much guess what gear Im in.

Sep 17, 2008 | 2005 Ford Mustang

1 Answer

Exterior door handle


sounds like your rod came off inside, possible broken plastic retaining clip that holds the rod on the mechanism. real simple fix, just a pain to see and get to.

Jul 19, 2008 | 1966 Ford Mustang

1 Answer

Took the window apart for my 2001 mustang got a new motor how do i put it back together


be sure motor is problem and not regulator ..look for worn teeth on regulator..motor comes away with 3 bolts and simply change out with new motor..regulator with motor change out is more nasty ..bolts need to replace rivets you will be cutting away

Jul 07, 2008 | 2001 Ford Mustang

1 Answer

Starting


Check your cables and ends. If you have to, pull starter out and bench test it with a set of jumper cables. Before you pull it, jump the solonoid with a piece of wire and see if it activates the starter. Be sure you have a good battery.

Jun 13, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...