Question about 2001 Hyundai Accent

1 Answer

How do u change a broken lug nut - 2001 Hyundai Accent

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Follow the steps below:

  1. Remove caliper and rotor.
  2. WD40 can only help
  3. Rotate hub such that damaged stud is at bottom.
  4. Lower the hub onto a block of wood on top of a jack stand. (Don't put all the weight onto it, just enough to brace it).
  5. Gentle taps with a sledge.
  6. Use a lug nut to set the new stud.

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix or change broken lug nuts on a 1996 Plymouth voyager


Are you talking about the lug nut or the threaded stud? How is the nut broken? Maybe your saying the nut is rounded off?

Maybe you can take die-grinder and split the nut, to get it off. Then go to auto store and get a new lug nut.

Mar 01, 2015 | Plymouth Cars & Trucks

1 Answer

How to replace broken lug stud on front wheel


You can either remove the bearing, or what I do is. On the front/top of the spindle, I grind away a little of the spindle. Just enough to get the lug out. You see where to grind. You can knock the lug out with a hammer, but can't get it out of the way without grinding. Reinsert the new lug. I use a bigger nut to go over the lug, then use a lug nut to seat it into place.

Aug 31, 2014 | 2002 Buick Century

2 Answers

My 91 Honda Accord EX wagon has a broken lug on front driver side. How do i fix it, & will it be ok in the meantime with the three lug nuts on tight?


It is not recommended to drive it like that. It's not too bad to replace but it depends on your level of mechanical skill, You need to remove the brake caliper and disc and then you can simply knock the remains of the broken stud out with a hammer and punch, To fit the new one insert the stud and then put a large nut over the thread, then fit the lug nut and tighten it to pull the stud into the hub, then simply remove the lug nut and put it all back together.

Jan 18, 2012 | Honda Accord Cars & Trucks

1 Answer

How to replace a broken lug nut?


Lug Nuts can be purchased at your local parts store.
Once you get the nut...just screw it onto the lug and set to the proper torque.

Hope this helps...

Aug 28, 2011 | 2002 Chrysler Town & Country

1 Answer

I am wanting to replace the rear wheel studs that are broken. The wheel hub flange won't come off. Is there a special puller for this, do I need to apply more force or is there another method for removal?


You do not remove the wheel hub flange, just follow the procedure that I replied to earlier, and this is the procedure if you do not want to obtain a special tool for pressing the lug studs;

First you will have to pound the broken lug studs out of the wheel hub, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down to take up the slack.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Jun 13, 2010 | 2003 Chrysler Town & Country

2 Answers

Studs for rear wheel mounting broken off. How are they repleced?


First you will have to pound the broken lug studs out of the wheel hub, then you will need a lug nut and about a half an inch thick of flat washers.

1. Insert the new lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads.

2. Then slip the flat washers onto the lug stud followed by the lug nut, and run the lug nut down to take up the slack.

3. Then using a breaker bar tighten the lug nut until it pulls the lug stud through the wheel hub and it is flush with the wheel hub.

Be sure that the amount of flat washers used will make up for any non-threaded part of the lug stud that might stick out past the wheel hub preventing the lug nut from pulling the lug stud all the way through the wheel hub, and basically you do not want the lug nut to run out of threads before it can pull the lug stud flush with the wheel hub.

Jun 13, 2010 | 2003 Chrysler Town & Country

1 Answer

Broken lug nuts


Get how ever many wheel bolt's you need and one more lug nut, you will used that one to press in new wheel bolt, any parts place will have these parts, remove tire with hammer hit broken stud till it come's out through the back side, put new wheel bolt and with extra lug nut press in bolt, hope this was very helpful.

May 20, 2010 | 2004 Ford F150

2 Answers

Broken lug nut how to replace lug nut studs


take off tire. remove old stud by hammering it out with a punch. put a socket behind axle plate so as not to break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire!

Apr 14, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Broke off lug nut while changing a rear tire


You will have to remove the brake drum or rotor if it has disc brakes and drive the broken lug out of the drum or rotor. Purchase a new lug from any auto parts store buying the exact same size and drive the new one in. Reinstall the tire/wheel and torque the lug nuts to 100 lb/ft with a torque wrench.

Oct 28, 2009 | 1991 Ford Taurus

1 Answer

Rear tire lug bolts


You have to remove the tire/wheel assy. remove the brake drum, you will see the spindle with the bolts there. punch out the broken bolts install new buy pushing thru the hole.Find some regular nuts that will fit over the stud, put your new nuts on and tighten up till flush in back.

Jun 07, 2009 | 2003 Chevrolet Cavalier

Not finding what you are looking for?
2001 Hyundai Accent Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...