Question about 1992 Ford F250

Open Question

My 1992 ford f-250 has a 7.5 liter gas engine and my transmission went out, what transmission does my truck have?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: 1992 ford ranger 3.0

i was once pulling a trailer with a ranger when it suddenly lost power and the engine died. turns out the problem was with the fuel shut off inertia switch. the switch is supposed to activate in case of accident. on my model the inertia switch is located in the passenger side under the glove box. dont know where yours is located. once you find it, just push the button and see if it resets. good luck.

Posted on Sep 26, 2008

Ad
  • 4102 Answers

SOURCE: 2004 Ford f-250 6.0 Liter Diesel will crank but

Hi, i would first try replacing the glow plugs as if you have problems starting from cold then this is the cause you can usually tell if it is the glow plugs if after running it up till temperature then turn it off and then start it again strait away if it starts fine when upto temp then this indicates that the glow plugs need replacing.
If it still has the problem when upto running temp then the chances are the fuel lines and injectors need cleaning.
You can buy a fuel additive and using this will solve the problem just pour it into tank then give it a good run about 3 hours then see what its like at starting if this solves the problem then i would put this into my fuel once every couple of months.
If on the other hand you still have problems then the chances are it could be either the diesel pump failing or could be even worse like head gasket.
If this is the case then this will need testing at a garage as they have testing kits to test if their are any gasses getting into the water system this indicating a head gasket problem.
If you need further assistance then post back.
Hope this is some help to you

Posted on Aug 05, 2009

SOURCE: how many quarts of transmission fluid takes ford

about 15 if you have a flush machine do it. If you do a drain and fill you'l only drain about half of it out. so your not really gaining anything by doing it yourself

Posted on Sep 09, 2009

motor1258
  • 6674 Answers

SOURCE: 1999 Ford F-250 Super Duty 6.8 liter v10 is

You'll have to drain system down when cooled off, remove any brackets in your way such as power steering reservoir holding bracket, then remove 2 bolts holding the housing, and remove it. Rad hose should be o.k. to leave on, but if it creates a problem, remove it as well. I'd install a new thermostat and "o" ring complete,then a new gasket as well. Clean all surfaces well before re-installing. Replace any bracket(s) you removed to access housing, after housing is installed. Remember, air valve on edge of thermostat goes in 3 oclock position when re-installed. Also a reminder as well, spring on thermostat goes down when re-installed. After all is re-assembled, re-fill coolant and start engine and run with heater on to bleed out all air. Leave rad cap off and pay attention to temperature gauge and when you see it getting to normal operating temperature, watch flow in rad for increased flow, indicating thermostat opened and coolant is circulating properly. Wait until you see that flow increase 2 or 3 times, and air should be out of system, and top up coolant in rad, put cap back on, and check that return bottle is at proper level as well. Keep an eye for any leaks, and re-check return bottle periodically for first little while, just to be sure all is good. Note: some only use the "O" ring as a seal, and no gasket is required, but just check that at autoparts place where you get part.

Posted on Dec 28, 2009

toneman2121
  • 775 Answers

SOURCE: 2004 Ford F-250 6.0 liter diesel loosing coolant

i'm getting "internal control module keep alive memory?" for fault p0603. which i think has nothing to do with using coolant. i assume you're finding no leaks, so it's leaking somewhere you can't see. does it smell of antifreeze in the interior? is the carpet wet? the heater core might be leaking into the interior. there could be a slow leak on the top of the engine and it's boiling away before it has a chance to pool. fill your reservoir fully. let the engine get hot. inspect for steam in the engine compartment.

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace alternator, what cars or trucks are compatable to 1991 3.0 liter engine


AerostarV6 - 3.0L vin U 182ci - MFI GAS OHV
7 vehicles
1986 - 1992

BroncoV8 - 5.0L vin N 302ci - MFI GAS OHV
2 vehicles
1986 - 1987

BroncoV8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

BroncoV8 - 5.8L vin H 351ci - MFI GAS OHV
5 vehicles
1987 - 1991

E-150 EconolineV8 - 5.0L vin N 302ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-150 EconolineV8 - 5.8L vin H 351ci - MFI GAS OHV
5 vehicles
1987 - 1991

E-150 Econoline Club WagonV8 - 5.0L vin N 302ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-150 Econoline Club WagonV8 - 5.8L vin H 351ci - MFI GAS OHV
5 vehicles
1987 - 1991

E-150 Econoline SuperV8 - 5.0L vin N 302ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-150 Econoline SuperV8 - 5.8L vin H 351ci - MFI GAS OHV
5 vehicles
1987 - 1991

E-250 EconolineV8 - 5.0L vin N 302ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-250 EconolineV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-250 Econoline Club WagonV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-250 Econoline Club WagonV8 - 7.5L vin G 460ci - MFI GAS OHV
1 vehicles
1991

E-250 Econoline HDV8 - 5.8L vin H 351ci - MFI GAS OHV
5 vehicles
1987 - 1991

E-250 Econoline SuperV8 - 5.0L vin N 302ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-250 Econoline SuperV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 EconolineV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 EconolineV8 - 7.5L vin G 460ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 Econoline SuperV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 Econoline SuperV8 - 7.5L vin G 460ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 Econoline Super WagonV8 - 5.8L vin H 351ci - MFI GAS OHV
4 vehicles
1988 - 1991

E-350 Econoline Super WagonV8 - 7.5L vin G 460ci - MFI GAS OHV
6 vehicles

1988 - 1994*

F Super DutyV8 - 7.5L vin G 460ci - MFI GAS OHV
7 vehicles
1986 - 1992

F-150V8 - 5.0L vin N 302ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-150V8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

F-150V8 - 5.8L vin H 351ci - MFI GAS OHV
7 vehicles
1986 - 1992

F-150 Super CabV8 - 5.0L vin N 302ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-150 Super CabV8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

F-150 Super CabV8 - 5.8L vin H 351ci - MFI GAS OHV
7 vehicles
1986 - 1992

F-250V8 - 5.0L vin N 302ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-250V8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

F-250V8 - 5.8L vin H 351ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-250V8 - 6.9L vin 1 420ci - MFI DIESEL OHV
2 vehicles
1988 - 1989

F-250V8 - 7.3L vin M 445ci - MFI DIESEL OHV
7 vehicles
1988 - 1994

F-250V8 - 7.5L vin G 460ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-250 Super CabV8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

F-250 Super CabV8 - 5.8L vin H 351ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-250 Super CabV8 - 6.9L vin 1 420ci - MFI DIESEL OHV
2 vehicles
1988 - 1989

F-250 Super CabV8 - 7.3L vin M 445ci - MFI DIESEL OHV
7 vehicles
1988 - 1994

F-250 Super CabV8 - 7.5L vin G 460ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-350V8 - 5.8L vin H 351ci - 4BBL GAS OHV
5 vehicles
1988 - 1992

F-350V8 - 5.8L vin H 351ci - MFI GAS OHV
2 vehicles
1986 - 1987

F-350V8 - 6.9L vin 1 420ci - MFI DIESEL OHV
2 vehicles
1988 - 1989

F-350V8 - 7.3L vin M 445ci - MFI DIESEL OHV
7 vehicles
1988 - 1994

F-350V8 - 7.5L vin G 460ci - MFI GAS OHV
2 vehicles
1988 - 1989

F-350 Super CabV8 - 7.3L vin M 445ci - MFI DIESEL OHV
7 vehicles
1988 - 1994

F-350 Super CabV8 - 7.5L vin G 460ci - MFI GAS OHV
7 vehicles
1988 - 1994

F53V8 - 7.5L vin G 460ci - MFI GAS OHV
2 vehicles
1988 - 1989

F59V8 - 7.3L vin M 445ci - MFI DIESEL OHV
1 vehicles
1991

RangerV6 - 3.0L vin U 182ci - MFI GAS OHV
1 vehicles
1991

Ranger SuperV6 - 3.0L vin U 182ci - MFI GAS OHV

Feb 28, 2011 | 1991 Ford Aerostar Extended

1 Answer

I have a f250 that dont have overdrive its a 7.5 liter engine can i put a overdrive trans if so where do i get one. gas is bad and rpm is high 3000 at 60 mph


it has a C-6 transmission in it now, you can get an aftermarket overdrive, but you will need a new driveline after installation. replacing the C-6 with an E40D transmission is possible, but you will need to get a stand-alone computer to run it. (kaufmann engineering has them) also new driveline, coolant lines etc.

Sep 03, 2010 | 1989 Ford F 250

1 Answer

How do you change a starter in a 1995 ford E-250 van,5.8 engine,and 8 liters


Look Under Vehicle where the transmission mounts to the engine, you should see the stater mounted to the side. remove bolts 17mm i believe, remove 2 wires attached to starter

Apr 04, 2010 | Ford E-250 Cars & Trucks

2 Answers

2004 Ford F-250 6.0 liter diesel loosing coolant


i'm getting "internal control module keep alive memory?" for fault p0603. which i think has nothing to do with using coolant. i assume you're finding no leaks, so it's leaking somewhere you can't see. does it smell of antifreeze in the interior? is the carpet wet? the heater core might be leaking into the interior. there could be a slow leak on the top of the engine and it's boiling away before it has a chance to pool. fill your reservoir fully. let the engine get hot. inspect for steam in the engine compartment.

Feb 28, 2010 | 2004 Ford F250

1 Answer

1990FORD 250 Auto Trans - gas engine 450


in the safety switch on side of transmission

Oct 15, 2009 | Ford F-250 Cars & Trucks

1 Answer

What kind of transmission fluid does it take


Specifications Notes Use only Mercedes-Benz approved fluids

TYPE AF(DEXRON-II (R) Automatic Transmission Fluid) CAPACITY, Initial Refill*: 1982-85 190E 5.5 Liters 5.8 Quarts 1982-92 All w/V8 engines 7.7 Liters 8.1 Quarts 1986-91 190E, 260E, 300E 2.6L 6.0 Liters 6.3 Quarts 1986-91 300 Series 2.6L, except SL 6.2 Liters 6.6 Quarts 1990-91 300SL 6.0 Liters 6.3 Quarts 1992 600SEL 7.7 Liters 8.1 Quarts * Add specified quantity. With engine at operating temperature, shift transmission through all gears. Check fluid level in PARK, and add fluid as needed
diesel TYPE AF(DEXRON-II (R) Automatic Transmission Fluid) CAPACITY, Initial Refill*: 1984-89 190D Diesel 5.5 Liters 5.8 Quarts 1984-85 300 Series w/turbo 6.2 Liters 6.6 Quarts 1986-87 300 Series Diesel 6.2 Liters 6.5 Quarts 1990-93 300D Diesel 5.5 Liters 5.8 Quarts 1990-91 350SD, 350SDL Diesel 6.2 Liters 6.6 Quarts 1992-93 300SD Diesel 6.2 Liters 6.6 Quarts * With engine at operating temperature, shift transmission through all gears. Check fluid level in PARK, and add fluid as needed

Sep 17, 2009 | 1989 Mercedes-Benz 190

3 Answers

Trans I.D. by vin code


I can tell you what engine is suppose to be in it by the VIN. I can tell you what transmission you have if you can describe the shape of the bottom pan. As far as the engine that you have that is tough. The engine size should be stamped on the rear of the engine near the distributor near where the engine and transmission meet. Rectangular pan 4 speed= 700r4 Pan like the state of Illinois, 3 speed= TH400 Squared off in front, tapers on both sides to the rear and slopes up to the rear, 4 speed=4L80E These are the only transmissions that were factory installed in a 1992 C1500. If it looks different let me know. You never know what someone has installed.

May 27, 2009 | 1992 Chevrolet C1500

2 Answers

Gas smell and smoke


TRANSMISSION FLIUD

Jul 28, 2008 | 1992 Ford Explorer

1 Answer

Hard starting


Coolant temperature sensor sounds like it went bad. It is reading that the engine is warm all the time, so the computer is not commanding additional fuel for startup. Easy and cheap fix.

Jul 13, 2008 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
1992 Ford F250 Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...