Question about 1998 Chevrolet Cavalier

1 Answer

How do I replace broken wheel studs on the Front Right wheel hub?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The studs will plainly hammer out. Hit the threaded part till it will wobble. A hole on the back side of the hub will be there to pull the broken stud out. Replace it with a new one and use the lug nut to tighten in in. Stacking washers will help very much doing this process. If none are available have the wheel installed to get the studs in tight

Posted on Jul 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken wheel studs on a 1987 jeep wrangler


No need to replace the hub just the studs. The come in from the back and are splined to prevent the stud from turning with the nut. Remove the hub --drive out the broken studs and put the new ones in from the rear and drive them back in. Get the studs from the dealer spares or a good tyre retailer.

Apr 08, 2013 | 1987 Jeep Wrangler

1 Answer

How do I replace a broken lug nut out of 98 windstar?


you don`t say if its front or rear lug nut(assuming you mean stud).remove the wheel and then the drum or rotor,then take a hammer and hit the broken stud to remove it from the hub assembly.with the correct wheel stud insert it through the hole and make sure its in straight,install the wheel nut and tighten the nut to pull the stud into the hub until all the way in.you may have to install washer on the stud and re-install the nut and tighten until the stud is seated all the way.

Sep 16, 2011 | 1998 Ford Windstar

1 Answer

How to replace broken stud of honda crv 2001 front wheel


remove wheel, brake assembly & rotor. rotate to where the broken stud is in the opening where the brake assembly was. drive the broken stud out of the hub flange. then install the new stud by stacking washers on the new stud and tighten the lug till it pulls the new studs flange tight against the back side of the hub. remove lug and washers , reassemble .

May 25, 2011 | Honda CR-V Cars & Trucks

1 Answer

Broken front wheel stud onhyundai terracan


this is a very in depth procedure I do not recommend doing this if you cannot or have not taken a wheel bearing off. That being said this is how you do it:
after you have removed the wheel. remove the brake caliper from the steering knuckle* after hanging hte caliper in a safe location try to knock the stud through the wheel bearing**, if the stud does not come free of the steering knuckle then the wheel bearing must be removed, there are generally 3 'E-Torx' bolts that retain the wheel bearing to the hub on the steering knuckle ( you can turn the wheel left to right if need be but be sure that you have jacked up the entire front of the vehicle and that the parking beak is on and the wheels are chocked steady) once you have the broken stud out of the hub you then need to replace the new one. here is how that is done; set the new stud in place then apply a few large washers on the new stud that is seated in the hub. next thread on the lug nut and start tightening the nut down and draw the stud onto the hub, also it is a good idea to tighten down the stud backwards if it is through style lug, if not its no big deal either way, if you bottom out the lug you will ruin the chrome cap so it is a good idea to use as many washers as possible i usually use about 5-6, one inch washers for this procedure. be sure to check the " * " items at the end of these instructions. they will save ou time and trouble.


*YOU DO NOT HAVE OT REMOVE THE BRAKE HOSE FROM THE VEHICLE

** SOME TIMES YOU CAN ROTATE THE WHEEL BEARING AROUND AND GET A CLEAR AREA TO REMOVE THE WHEEL STUD FROM THE WHEEL BEARING WITH OUT REMOVING THE WHEEL BEARING ITSELF

Apr 18, 2011 | Hyundai Santa Fe Cars & Trucks

2 Answers

2000 Dodge Caravan....broken wheel studs...


Yeah , it's a fairly simple repair, All the wheel studs must be replaced and lug nuts also.Closely examine the wheel or get competent tyre replacement company to double check for damage ! Remove the brake disc caliper and brake disc itself (usually 2 cross head screws) , tap off (gently) it may be stuck thru corrosion / rust etc , Broken studs can be knocked out(towards drive shaft ) of the hub assy with a suitable drift and hammer (splined into hub) . The studs are a servicable replacement part. Check all other wheel nuts as this is usually a result from poor fixing or wheel replacement recently .. Good luck

Apr 05, 2010 | 2000 Dodge Caravan

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.


grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

3 Answers

Broken stud on wheel


The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course.

Aug 13, 2009 | Hyundai Motor 2003 Elantra

1 Answer

How to replace lug studs on 2002 chrysler town


I'll try to help you. If you are having trouble with 3 out of 5 studs on one wheel you may want to go to an autoparts store or Salvage yard to look at the whole hub. Usually a press is used to remove the bolts so you would be taking off the hub anyway. When you pay for 3 bolts and labor you may be better off in a Salvage yard or parts place for a different hub. The rear hub on front wheel drive cars is like a trailer axle. Much simpler to remove mounting bolts and press in new bolt. But if rear has differential(rear wheel drive) it has an axle shaft. Would be easier to grind and drill out broken stud on car. You can draw new bolt into place by placing bolt through a socket and use the wheel nut to draw the bolt into the hub.

Jul 08, 2009 | 2009 Chrysler Town and Country

1 Answer

I have 2 broken wheel studs, front right wheel on a 2003 Accord?


counter clockwise as normal...studs are pressed into hub..need to remove remains and then press new studs in...good luck

Nov 19, 2008 | 2003 Honda Accord

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...