Question about 1999 Lexus LS 400
I don't think the alternator have anything to do with the head light leveling,I have the same problem and believe it's a sensor,or wiring,and possibly when replacing the lamps or lens the car needs to be level.
Posted on Apr 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The brake wear indicator is a small metal stone-like sensor that attaches to the brake pad. Once the pad wears down to a certain level, it begins wearing into the sensor, breaking the circuit open.
Once the light has come on, the appropriate sensor (front or rear) must be replaced to return functionality.
Factory brake pads usually come with new sensors. Aftermarkets do not, and often have no provisions for attaching them either.
Alternately, you can bypass the brake level sensors by splicing the two wires for the sensor together. You will no longer have brake level warnings if you do this however.
Posted on Sep 12, 2009
slide the lower part of shifter handle down and you will find two screws, but there is 2 wires coming in from center console for overdrive button.you have to remove the center console cover and remove the 2 wires from connector and then pull up threw handle.when you go back together you will have to guide them back threw the handle.
Posted on May 21, 2009
you have to remove the head lamp. there are 4 bolts that hold it in. you will have to remove ouyer marker lens first.1 screw on top and pull forward. clips hold lens pretty tight.
Posted on Jun 16, 2009
Check the wiring harness in the left trunk hinge. You need to check for broken wires, most likely the yellow and wht/blk wire. Its a common problem with this model....Good luck.
Posted on Aug 02, 2010
Tips for a great answer:
Mar 23, 2016 | Lexus Cars & Trucks
May 17, 2012 | 1991 Lexus LS 400
May 05, 2010 | 1991 Lexus LS 400
Sep 12, 2009 | 1999 Lexus LS 400
Jun 14, 2009 | 1995 Lexus LS 400
May 01, 2015 | 1999 Lexus LS 400
726 people viewed this question
Usually answered in minutes!