Question about 1990 Ford Bronco

1 Answer

E4od in 1990 full size bronco wont let engine shut off in neutral and makes a winding down type noise when i put in park to shut turn off engine. new rebuilt trans, have not driven it and only went through gears twice. What would cause this and how can i fix it? Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Theres a lot of things that may cause this problem. A faulty transmission solenoid, faulty PCM (powertrain control module) or just a simple vacuum leak. If its the solenoid, you will have to replace it. If its the PCM you will need to have it resetted. If its a vacuum leak, its gonna be just some worn vacuum hose problem or there could be a hose detached somewhere so I suggest you have a closer look. Hope this helps and have a good one!

Posted on Jul 11, 2010

  • stephen bruno
    stephen bruno Jul 12, 2010

    Could you send me a schematic or link to one that shows the vaccum hoses and any other attachments;tranny to frame or engine grounds, etc.

    thanks
    steve


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 87 Bronco, full size with 5.0L efi. I can shift from 2wd to 4wd his with no problem. I can also put the transfer case in Neutral. The transfer case will not go into 4wd low. Also must shut...


This is going to be in the synchros in the T-case. The most economical way is to either have the unit rebuilt or replaced used. If you need any other info, let me know.

Aug 08, 2010 | 1987 Ford Bronco

2 Answers

I have a `92 ford bronco xlt with a 351w and the e4od. when i`m driving down the road and let off the gas, i get a very loud chattering noise. it doesnt do it all the time but if im coasting and i shift...


A few months back, if you remember, did you hear a "squeak squeak " that got faster as you picked up speed, then went away as you went over 25 to 30 mph? if so replace your universal joints on drive shaft.

Mar 19, 2010 | Ford Bronco Cars & Trucks

1 Answer

I have a 1990 Ford F150 4wheel drive pickup; and it is equiped with a straight 6 cyl. engine and an automatic transmission w/overdrive. What years of stock production transmissions will interchange with my...


What you have is an E4OD transmission and will work with all Ford small block engines (300, 302, 351) in F150,F250, F350 and full size Broncos from 1983-1993.

Dec 30, 2009 | 1990 Ford F150

2 Answers

E40d trany will not shift into higher gear but works manualy from 1-2 gear


sounds like a bad trans.
could be a shirft modualter which is vaccumm controlled.
check that before taking the trans out.

May 29, 2009 | 1990 Ford Bronco

1 Answer

Will a ford c6 tranny bolt on to a 1995 ford 5.0l or 5.8l motor?


From 1990-1996 The C6 was replaced by the E4OD which was modified to include a fourth forward speed and electronic shift controls, replacing the hydraulic control mechanism of the C6.

The C6 works fine in your bronco.. Your friend will need a different transfer case!. i dont have the manual but this is my best guess. FOrd likes to make cars that have interchangeable parts. Like a 1999focus can interchange with 2007. as long as the liter and engine size are the same. In some cases. you will have to use different transfercase.

So you might be better off with a c6 transfer case or c4 for your friend.

Hope this helps

Feb 16, 2009 | 1995 Ford Bronco

1 Answer

Fuel pump switch


also known as the inertia switch is located on the left kick panel area by the emergency brake pedal . 90 full size bronko .

J5

Jan 16, 2009 | 1990 Ford Bronco

1 Answer

1990 ford bronco/full size headlight, cab lighting, and sterio shut off


the connection to the light adjustment knob thats imbeded in your dash. the one that adjusts the intensity of your dash lights and such probably came loose or detached.

Nov 24, 2008 | 1990 Ford Bronco

1 Answer

1990 full size bronco, won't start


check to see if you are getting fuel to the carb. if you have fuel then check to make sure you have spark

Nov 22, 2008 | 1990 Ford Bronco II

Not finding what you are looking for?
1990 Ford Bronco Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...