Question about 1986 Pontiac Grand Prix

1 Answer

How to fix a door handle on a 1986 pontiac grand prix

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 365 Answers

Remove the inside door trim from the door
remove the weather protection from the inner door
panel
now look up inside the door and you should see a
small rod which is held onto the door handle with a
plastic fastener, pry the plastic fastener from the rod, it
just clips onto the rod so you only have to pry it from
the end of the clip to release it
slide the rod from the door handle, also remove any
other rods or cable that go to the handle
Use a thin extension arm with a socket to suit the nuts
or bolts that hold the handle in place, there should be a
few small holes directly behind the handle on the inner
panel
slide the socket extension arm with socket attached
through the holes and remove the nut or bolt holding
the handle in place
The instructions I am giving you may not be exact but it
should not be too much different if it is different at all.

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both handles on 1996 grand prix broke how do I replace them


there should be a couple star bit bolts on inside of door behind the handle

Dec 05, 2012 | 1996 Pontiac Grand Prix

1 Answer

1999 Pontiac Grand Prix driver side door will not shut


The latch is stuck,get WD40 and spray it and move latch handle and move latch at same time Angie.

Nov 06, 2012 | 1999 Pontiac Grand Prix

1 Answer

How do you remove a back door panel on a 2000 Pontiac Grand Prix GT to fix a window that has fallen off the track?


remove the door handle screws, and possibly the armrest has some screws hidden under dimples. then remove door handles from metal linkage and use a small putty knife or flat screwdriver and gently pop the door panel loose from the door. there are little press in plastic tabs that are connected to the door panels that just pop out of the holes on the doors , if you be careful and wedge away from the door with the screwdriver

Jul 31, 2010 | 2000 Pontiac Grand Prix

1 Answer

Door not locked but handle broke off, car is


You could always break a window! You could try and wedge one of the windows open enough to stick a coat hanger or something in to try and unlock the passenger side. Good luck

Jan 28, 2010 | 1996 Pontiac Grand Prix

2 Answers

Door handles don't open....


i have the same problem on my 1995 grand prix gtp 2 door coupe...the only differnce is that i had door poppers installed and took off the lock rod, turnes out the solenionds cant pull the latch open, so i need stronger solenoids. but my door wont open either...if anyone has any fixes to this problem let me knows ASAP!! i cant crawl thru the passenger side in the middle of a S. Dak. winter...

Oct 09, 2009 | 1995 Pontiac Grand Prix

1 Answer

How do u remove the door pannel on the pontiac grand prix 06


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

Oct 02, 2009 | 2006 Pontiac Grand Prix

1 Answer

Both door handles broken


there are to rods one for the lock and one for the handle pull the handle rod if it is exposed pull on it / The only way to replace the handle and or lock is to take the door apart/ please rate my response thank you very much

Jan 31, 2009 | 1996 Pontiac Grand Prix

1 Answer

1992 Pontiac Grand Prix 2 door


The SE and LE indicate opinions on the cars. Most of the parts will interchange. When doing engine changes, the best way is to swap the ECM also.

Jul 10, 2008 | 1992 Pontiac Grand Prix

1 Answer

1997 Pontiac Grand Prix Door Latch


i havnt come across any easy fixes for this but to replace the linkage in the door....sry to tell ya that.....

Jul 03, 2008 | 1997 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...