Question about 2003 Honda CR-V

1 Answer

How do you access the tail lights on a 2003 Honda CRV?

I need to replace a brake light bulb.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Open the back door, observe the tail light lenses if no screws on the outside. Then there must be an access panel or fasteners on the inside possibly hidden by the trim or carpet. You also need to get the right bulb for your make and model. you can find this in your owners manual. It should also tell u how to replace it.

Posted on Jul 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 tail light fuse location honda crv


I had this problem with my 2007 Honda CRV -- all the lights worked EXCEPT the tail/running lights and the license plate light. The other tail lights worked -- brake, reverse, indicators, and hazards. Front headlights also worked, but when the headlights went on the back tail lights did not (not to safe for driving at night!!)
The fuse was #15 in the interior fuse box (under the dash driver side) with the label "small exterior lights" ( also check fuse #19 labeled "small lights main"). The cause of my problem, I believe, is a bad or lose wire in my license plate light.

Jan 16, 2012 | Honda Civic Cars & Trucks

Tip

How to replace the brake light on a 2003 honda pilot ?


There are two philips head screws that are only accessible after opening the rear tailgate lid. Remove the two screws which will allow the removal of the entire tail-light assembly. (Note that it might take some effort as there are two retaining lugs on the outer edge of the fixture which are press fitted but wiggle and pull and they will pop loose, just be careful.) The lights are identified tail and brake. A third turn to the left and the bulb housing can be removed. Simply pull the bulb from the plug and replace with like bulb bought at any auto parts store. NOTE : what ever you do .Do it carefully and slowly. Thanks.this will help.

on Mar 08, 2010 | Honda Pilot Cars & Trucks

1 Answer

How to replace brake light bulb


  1. Open the back hatch of your Honda Pilot and look for two small screws. They will be right behind the tail light. Remove the two screws, using a standard screw driver. You should now be able to pull the tail light box away from the car a few inches to allow access to the sides of the tail light box

  2. Remove the two ball sockets found on both sides of the tail light box. At this point you should be able to move the entire assembly enough to get at the tail light. Inside the tail light you will find three bulb sockets. Remove all three bulbs by turning the sockets to the left.

  3. Then replace each break light bulb by screwing them clockwise into the sockets. Then, reassemble the tail light box in reverse order.
Hope this is a help PLEASE RATE MY HELP

Nov 28, 2010 | 2009 Honda Pilot

1 Answer

Taillights


Have you checked the fuse for the tail lights which should be located on the side of the dash behind an access panel on either the drivers side or passengers side. If you open the door you should see the panel.

Jul 13, 2010 | 2003 Honda CR-V

1 Answer

Honda crv 2004 brake lights night lights


LOOK FOR BRAKE LIGHT FUSE OR BURNED OUT BULBS BAD BULB SOCKETS OR GROUNDING PROBLEM.

Feb 24, 2010 | 2004 Honda CR-V

1 Answer

2003 Honda Pilot: Trying to replace brake light bulb. Lense housing does not come off after removal of two locking bolts.


Remove the 2 philips head screws, which are accessible when the tail gate is opened. There are 2 mounting tabs that hold it in place, wiggle the entire unit to remove it.

Nov 27, 2009 | 2003 Honda Pilot

1 Answer

2003 Honda Odyssey Brake light replacement


open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

1 Answer

Both brake lights do not work


try changing the bulbs

Dec 01, 2008 | 1999 Honda CR-V

1 Answer

Tail light out


Open the rear hatch. There are two screws towards the inside. Unscrew these and remove the housing.Turn the bulb holder 1/8 turn counterclockwise and pull out. Push in on the bulb and turn it counterclockwise, then pull the bulb out of the holder. Replacement is exact reverse of removal.

Nov 22, 2008 | 1998 Honda CR-V

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

Not finding what you are looking for?
2003 Honda CR-V Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...