Question about 2008 Kia Optima
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
Posted on Jul 18, 2008
You need a service and repair manual for that vehicle, about 15 or 20 bucks at any parts store, and some librarys.
Posted on Aug 16, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Tips for a great answer:
Oct 13, 2015 | Mercedes-Benz C-Class Cars & Trucks
May 17, 2015 | 2008 Chrysler 300
Feb 18, 2014 | 2008 Ford Escape
Aug 29, 2012 | 2002 Kia Optima
Apr 15, 2010 | Kia Optima Cars & Trucks
Feb 20, 2010 | 2008 Mitsubishi Lancer GTS CVT Sedan
Nov 21, 2009 | 2008 Mitsubishi Lancer GTS CVT Sedan
Oct 10, 2009 | 2007 Kia Optima
Aug 16, 2009 | 2004 Kia Optima
Jul 14, 2009 | 2001 Kia Optima
577 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: