Where is the location of the jack on a 1999 chevy blazer?

Sorry but Chevy does not have a inertia fuel shut off switch . Fuel Pump Electrical Circuits Description and Operation

1999 CHEVROLET BLAZER Body Control Module (BCM)

www.rockauto.com/catalog/x,carcode,1353619,parttype,2888

... V6 > Electrical > Body Control Module (BCM). 1999 CHEVROLET BLAZER 4.3L V6 : Electrical : Body Control Module (BCM), Price, Core, Total, Add to Cart ...

electric problem maybe bcm? - Blazer Forum - Chevy Blazer Forums

blazerforum.com > ... > 2nd Gen S-series (1995-2005) Tech

Oct 25, 2009 - I have seen on line it could be the bcm module. ... In my 1999 Chevrolet Blazer it is located under the cd/radio and computer climate control. Looking for a Diagram or Info on the Body Control Module
Feb 4, 2012
body control module
Sep 25, 2009
More results from blazerforum.com

ACDelco 19153625 GM Original Equipment Body Control ...

1999 CHEVROLET BLAZER Body Control Module (BCM)

www.rockauto.com/catalog/x,carcode,1353619,parttype,2888

... V6 > Electrical > Body Control Module (BCM). 1999 CHEVROLET BLAZER 4.3L V6 : Electrical : Body Control Module (BCM), Price, Core, Total, Add to Cart ...

electric problem maybe bcm? - Blazer Forum - Chevy Blazer Forums

blazerforum.com > ... > 2nd Gen S-series (1995-2005) Tech

Oct 25, 2009 - I have seen on line it could be the bcm module. ... In my 1999 Chevrolet Blazer it is located under the cd/radio and computer climate control. Looking for a Diagram or Info on the Body Control Module
Feb 4, 2012
body control module
Sep 25, 2009
More results from blazerforum.com

Black box under hood marked, "fuse box."

yes

There are two one for coolant fan and one for engine temp . engine temp is usally located in the side of the head on driver side by exhaust manifold .
coolant fan temp sensor is located on the intake near the thermostat housing .

You're probably not going to want to hear this, but you have to actually unbolt the body from the frame and jack up the body to get at the bolts that hold the transmission to the engine. Not a job for an amateur.

Look closely between the bumper and tail gate, you should see a square socket looking hole. You take the handle off your jack, insert it into that hole and twist the jack handle to lower your spare tire.

Dear hispeed3,

If you haven't bought the part yet and are planning on replacing it ...i'd go to the auto parts store and ask them for the part location. They are usually glad to do this. I know Advanced Auto Parts does this for me.

Are you having a problem with your 2005 Chevy Trail Blazer?
If so...I'm here for you!

jack
Please Rate This!

the starter is located on the passenger side lower motor. it has two bolts in it that hold it in place. it actually goes through a hole/slot in the transmission to the flex plate.

1st. disconnect the negative cable on the battery.
2nd. raise the vehicle safely and place a jack stand under the vehicle out of your way but near where you will be working(for safety).
3rd. remove the two bolts that hold the starter in place.
4th. remove the wires from the back of the starter.
5th. install in reverse order of above.

note: there may be little plates between the starter and the mounting points called shims. if there are then make sure you put them back.