Question about 2004 Toyota Sienna

1 Answer

How do I replace a 2004 toyota sienna headlight? The bulb I bought at the Napa parts store doesn't seem to fit in properly.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,927 Answers

The bulb has to be lined up in the headlamp housing before it will fit properly,is it a 80 dollar bulb?or 8 to 15 dollar bulb?the 9006 bulb,the cheaper one has to be aligned just right,or it will not fit,and it can be difficult to do,but the 80 dollar bulb,just fits one way only.

Posted on Jul 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights do not work high or low beam all other lights work


Re: Condensation in Sienna Right Headlight.... - Toyota Sienna Forum

www.siennachat.com/.../4606-condensation-sienna-right-headlight.html
Mar 10, 2009 - 15 posts - ‎9 authors Over the years, I was not a frequent visitor to SiennaClub...but when I did visit, it was... in the right, passenger-side xenon HID headlight of my 2004 Sienna...the light has... Check with your dealer and see if they can do anything about it. .... :o The HID bulb is also a PITA to remove because you are working ... Re: 2004 Sienna no brake lights, radio, heater/AC ...
15 posts
Jan 4, 2013
Thread: HELP: Both Low Beams don't Work
6 posts
Nov 27, 2011
Thread: 2000 sienna drl and/or headlight issue
5 posts
May 7, 2010
Automatic Headlight Option: Useful or Not?
8 posts
Mar 3, 2010
More results from www.siennachat.com

Toyota 2004 Sienna repair: Replacing HID ballast or ...

toyotarepairsemipro.blogspot.com/.../replacing-hid-ballast-or-computer....
May 1, 2010 - Replacing HID ballast or computer control lighting for the Headlight. Just got a ... Up until now, I did not know I had the option of seeing twice as far with Xenon. Also up to ... In the end after buttoning everything up, the light did work fine. .... Howdo you determine if you have a HID or non-HID light? Reply ...

Oct 15, 2015 | 2004 Toyota Sienna

1 Answer

Toyota Sienna 2004 Headlight HID lightbulb does not work after replaced.


CHECK YOUR POWER AND GROUND IF GOOD BAD OR WRONG BULB

Feb 14, 2013 | 2004 Toyota Sienna

1 Answer

I drive a 2004 Toyota Sienna LE. Recently I changed a burnt out brake light bulb. I also changed a burnt fuse once my turn signals went spastic. After changing the burnt fuse, my signals now work fine. Now...


you have fitted a single pole bulb into a two pole socket ,have a good look at the end of the bulb and the look inside socket and you will see what i mean

Mar 15, 2011 | 2004 Toyota Sienna

1 Answer

Bulb is dead on passenger headlight i purchased bulb but not sure how to replace


If you didnt know how to replace it, you should not have bought one. Most auto shops will not install parts not purchased from them. Its not a big deal to replace the bulb, just look at the rear of the housing and there wil be a cover and a ring or clip holding the bulb in. Be sure to NOT TOUCH the bulb with your fingers.

Dec 01, 2010 | 2006 Toyota Sienna

1 Answer

Can the headlight assembly of a 2004 Toyota Sienna be disassembled to replace a faulty low beam bulb?


The whole bulb will have to be replaced. One bulb has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it easier.

Sep 09, 2010 | 2004 Toyota Sienna

1 Answer

Toyota Sienna 2004 Headlight Problem


If you have the HID bulbs, and there is moisture in the bottom of the assembly, the high voltage box at the bottom will not work. this requires removing the whole headlamp, removing the circuit board from the bottom and drying out. I have done mine twice before finally finding how water was getting in at the top seam of the lamp assembly. You will have to dis-assemble part of the wheel well and bumper cover to gain access to all the mounting bolts. Best of luck

May 02, 2010 | 2004 Toyota Sienna

3 Answers

I have a Toyota Sienna with factory installed HID headlights (2004). The driver side light will not work and when I took it to the dealer they told me that the headlight computer needed to be replaced. ...


The ECU on my 2004 Sienna passenger HID light went bad due to the condensation in the light, or at least that's what it looked like when I opened it up. The ballast was all corroded. Anyway, I searched and searched online for a way to fix it without paying the dealer $900. I just fixed it today for $92. I got the replacement ballast brand new for $92 shipped from The Retrofit Source at this site: http://www.theretrofitsource.com/product_info.php?cPath=26&products_id=161
Then I searched for an online manual for 2004 Sienna, found that, and went through the procedure of partially removing the bumper cover, taking the screws for the light fixture out, turning it on it's side and replacing the ballast. It took me about 2 hours to do the whole job, and everything works fine.
By the way, I got the part from The Retrofit Source in about 2-3 days without paying any expedited shipping. They were extremely helpful on the phone, delivered earlier than I expected, and saved me $800!!

Nov 15, 2009 | 2004 Toyota Sienna

2 Answers

Moisture in headlight assembly, 2004 toyota seinna van. How do I take out to reseal or replace? It is the assembly on the passenger side.


Once the factory seal is leaking moisture, it can be hard to dry and reseal. You can try a hir dryer, and then look for a seam to lay silicone on, but the recommended fix is to replace the whole headlight assembly. The lens is not removable like on older lamps. The pieces are molded, and then epoxied together. Hard to split apart and get back together without damaging. Try a salvage yard.

Mar 20, 2009 | 2004 Toyota Sienna

2 Answers

I had moistured on my 2004 sienna headlight, How can i removed the moistured?


I fixed this problem on my 2004 Sienna. The moisture seems to come in from the top of the headlamp assembly. I generously applied Permatex Super Clear VINYL SEALANT to the seam at the top of the assembly after drying out the moisture by remvoing the bulbs. There are vent at the bottom of the assembly which should be open; there's a liitle foam plug that let's air in so the assembly is not intended to be airtight. There has been no moisture problem for about a year.

Jul 31, 2008 | Toyota Sienna Cars & Trucks

Not finding what you are looking for?
2004 Toyota Sienna Logo

Related Topics:

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...