Question about 2004 Kia Sedona

1 Answer

Changed the pads on my 04 Kia Sedona. Even though they are new my pedal goes to the floor when I go to stop. I think I need to adjust my rear brakes but not certain. How do I check and see if the auto adjusting is working or if it is froze up? If it is fraze up then how do I manualy adjust them out so that I can get may brakes back to as normal as possible? Please advise asap. I need to do this in order to get my van inspected and to keed my wife and 3 Kids safe. Thanks in advance for any and all help!

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 6,927 Answers

You will have to turn the drum,and adjust accordingly,adjust them little by little,until the drum drags on the brake shoes,adjust them until they drag,but you can still turn the drum by hand,you might want to remove the drum first,just to make sure the brake shoes are not too worn,and need replacing.If this was a t all helpful,please rate,thank you.

Posted on Jul 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After taking ff the ruber pad i plae my brake spoon into adjust and i can't see or feel the adjuster wheel.


I think if the self adjusters are working properly you should be able to push the parking brake pedal (e-brake) to the floor once and release pedal to adjust the rear brakes.

Mar 18, 2014 | 2004 Kia Sedona

1 Answer

Brake pedal goes to floor


for the pedal to go to the floor there is still air in the brake system. Start again starting from the longest line bleeding each in turn to the shortest line . make sure you have adjusted up the rear brakes before bleeding as every time you press on the pedal the shoes expand right out and when you take your foot off the pedal the shoes go all the way back in. adjust them manually and do not rely on the self adjuster as it only adjusts on wheel movement

Jul 15, 2013 | 2002 Ford Explorer Sport Trac

1 Answer

1999 corolla, brake pedal goes to the floor. how can we fix the brakes?


is the abs light on?the abs system only effects the pedal when you are stopping quickly to activate the system. you still have a hydrualic brake pressure problem. are the rear brakes shoes or pads? rear shoes out of adjustment can cause a low brake pedal.even though the master cylinder has been replaced doesn't mean you got a good part.if the part was a remanufactered part very likely it is bad. to determine if it is the master cylinder, plug off the lines from the side off the master cylinder and hit the brake pedal. if the pedal stays up look for a problem elsewhere in the system. if the pedal drops the the master cylinder is defective.

Jun 11, 2012 | Toyota Corolla Cars & Trucks

4 Answers

Brake pedal goes nearly to floor front pads, calipers, brake hoses changed, rotors turned Master cylinder changed, brake booster check valve changed rear brakes checked, drums good no ridge, shoe's...


I would go with not bled correctly

The booster should hold up with a hard pedal until
you start the engine, then vacuum causes it to move
down when pressing on the brake

Sep 16, 2011 | Saturn SC Cars & Trucks

1 Answer

How do you adjust the rear brakes on a 2003 kia spectra? It feels like you have to push the break pedals down to the floor in order for the car to stop. They seem to need tightening, but there doesn't seem...


The rear brakes on the Spectra will always engage less than the front brakes. If you have to push hard on the brake pedal then you probably have air in the brake lines from the last brake pad replacement. The brakes need to be bled with this method: Use 1/8 inch 2 foot long hose from parts store and attach from bleeder valve ball on the brake caliper to a bottle partially filled with brake fluid. End of hose should be submerged in bottle. With second person holding brake pedal to floor, slowly turn bleeder valve counter clockwise (loosen tiny bit) with wrench and watch for dirty brake fluid to create bubbles in the bottle. When bubbles start, quickly tighten bleeder valve back to tight. Second person lifts foot while valve is tight and then pushes pedal to floor again and THEN you again open bleeder valve slowly turning counter clockwise and watch for bubbles. Repeat until no more bubbles can be created in the bottle where the hose is submerged. Move to next caliper and repeat. For a firm brake pedal you will need to repeat this on all four calipers. My 2003 Kia's rear brake pads "fell apart" and never wore out in 190000 miles because they do not get used. The braking power is primarily in the front disk brakes on this model. Removing and replacing the rear drum brake linings did not even require me to bleed the brake lines. They weren't that tight before or after the replacement procedure.

Jul 24, 2010 | 2003 Kia Spectra

2 Answers

Spongy brake pedal


I have a 2001 Chevy 1500 4 X 4 that recently had all new pads, rotors, and calipers installed. Since then my brake pedal goes almost to the floor before I get any brakes. I took it back to the shop and they bled the brakes with no better results. I bled them also with no results. I took the truck back and they installed a master cylinder with no results. It's now at the Chevy dealer and they say it's normal - BS! I had good brakes before I had all of the brake parts replaced, no one can figure it out. If you have a load in the truck or if you tow anything you better be looking at the ditch to avoid an accident. The original brakes would put you nose into the windshield and now I could stop it better the Fred Flinstone way. Anyone have an answer????????

Jun 18, 2009 | 1998 Chevrolet C1500

1 Answer

Adjusting kia sedona rear brakes


I think if the self adjusters are working properly you should be able to push the parking brake pedal (e-brake) to the floor once and release pedal. .

Apr 20, 2009 | 2004 Kia Sedona

2 Answers

Disc Brake Emergency brake adjustment on 04' Chev Express Van


Continually push the brake pedal to set the brakes. (With park brake off). Brakes are self adjusting and will adjust to correct position.

Mar 29, 2009 | 2004 Chevrolet Express

2 Answers

Parking brake pedal goes to floor


Hello;
The parking brake cables may be stretched and in need of adjustment. Follow the cables along to a nut. Then you can tighten the adjusters up on both sides until you have the proper tension. Also make certain none of the brackets are bent or broken that the cables ride through.
Thanks;
RPM Northwest

Jan 19, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

97 ford e350 brake pedal goes to the floor...


are your rear drums set up? why did you bleed the brakes. when only when you installed new pads?

Sep 11, 2008 | 2002 Ford E350

Not finding what you are looking for?
2004 Kia Sedona Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...