Question about 1995 Jaguar XJ6

1 Answer

Vibration from rear end and noise1995 jaguar xj6 has new inner and outer Wheel bearings what could problem Be

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 151 Answers

Sounds to me like u need new u-joints

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2000 Subaru Forester S Turbo. My rear right wheel seems to wobble/vibrate when I turn to the left (when the weight shifts to the right) Can sum1 tell me what it could be


Take the wheel and get it balanced and check to see if wheel is bent. From another place beside the tire people you brought it to.
Differential service or was it rebuilt? Slide in axle or rear end differential may have slack in it. Rear end will make noise if it has a problem.
Could be a bent slide in axle. Jack it up and spin it with wheel on.
If 2wd jack up back and put it in drive.

Sep 23, 2015 | Cars & Trucks

1 Answer

How to replace front wheel bearing in a 1995 lincoln towncar


remove wheel, brake caliper, dust cap, cotter pin, nut and washer, remove outer bearing. re-install nut a few turns and pull off rotor catching the inner bearing with the nut and pulling inner bearing out of rotor. remove inner and outer bearing races, install new races and grease surfaces of races and pack new wheel bearings with bearing grease and re-install in reverse order. wheel bearing nut tighten then back off and snug until you can put a new cotter pin through the holes of the nut and spindle hole and bend over the pin to lock nut from coming lose. caliper bolts/pins tighten.

Sep 04, 2014 | Cars & Trucks

2 Answers

BAD VIBRATION AND HUMMING NOISE AT 70KM/HR


Have the wheel bearings / wheel balance checked.

Mar 02, 2012 | 2003 Honda Pilot

1 Answer

How to change wheel bearings on jaguar xj6 front 1996


Disconnect the vehicle battery ground lead.
Support the vehicle at the front and remove the appropriate wheel.
Remove brake caliper and disc assemblies see SRO 70 10
Note- Do not allow the caliper to hang by either harness or
flexible hose.

Pry off the hub grease cap
Remove and discard cotter pin
pull off castellated nut retainer
Remove the hub nut and bearing washer.
Carefully remove the hub assembly from the stub axle.

Pry the original seal from the spigot and discard.
remove the bearings and using a drift punch knock out the bearing cups.
Remove all traces of grease and dirt from the stub axle and back plate.
Note: the backing plate may be used to pull the inner bearing and seal if they stay on the stub shaft.
Press in the new bearing cups using a socket or other tool of the correct size to prevent damaging the new bearing cup or hub.
Note: Do not use bearing to press in the cup.
Pack the annular gaps of the oil seal lips with grease.
Wash the hub assembly thoroughly.
Ensure that the hub inner seal diameter is free of debris or damage and is lightly lubricated prior to assembly.
Only replace complete bearings, never cup or race in isolation.
Pack each race with approximately 4 ml of grease and position the inner race onto the stub axle.
Apply a smear of grease to hub inner surfaces and bearing cups. Assemble the hub to the stub axle followed by outer race, bearing washer and hub nut.
It is not necessary to fill the hub cavity with grease, merely protect from corrosion with a coat of lubricant. Seat the bearings by slightly tightening the hub nut whilst rotating the hub. Do not apply load without rotation.

Adjust End float. Set a Dial Test Indicator and adjust the hub nut to achieve the correct end float.
.001-.003"
As the adjustment is made, continually load the hub axially in both directions.
Without disturbing the end float setting, fit the castellated
nut retainer so that it aligns with both hub nut and stub axle drilling.
Secure nut retainer using a new cotter pin.

Reassemble brake rotor and caliper. Bolts MUST be tightened to specification
operation of the braking system verified.
Reassemble wheel

Dec 25, 2010 | 1996 Jaguar Xj Series

1 Answer

How do you repair the rear end inner and outer wheel barrings on a 95 buick century wagon?


Take the wheel off. Remove wheel speed sensor wires at the back of bearing assembly. Remove the torx bolts to remove bearing.honeymokey_2.jpg

Dec 13, 2010 | 1995 Buick Century

1 Answer

Rear end noise On a street rod


It could well prove to be a big job? by the sounds of it I would get it to a Jag dealer or indi Jag garage to be looked at properly.
It might mean that you need a new or second hand IRS unit.

Jun 02, 2009 | 1995 Jaguar XJ6

2 Answers

Vibration from 45-60 mph..new michlin tires ,aligned and balanced


have the steering rack checked for excess play, also have all the front end bushing checked, this is a common cause of this type of problem, it is the front end that is doing it, finding the worn part(s) is the job that needs to be done to correct this.

Mar 25, 2009 | 1989 Jaguar XJ6

1 Answer

1995 xj6 read end noise


likely the diff if a whine or if a clonk over bumps the rear shock bushings

Aug 31, 2008 | 1995 Jaguar XJ-R

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...