Question about 2005 Chevrolet Impala
Wiper blades going totally out of sync. The y ger twisted together. If I try fixing them one goes off the windshield. This are is only 62 months old and this is the second time this has happened. Is there some kind of known manufacturing defect?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Buick Century wipers out of sync
You could also see if the bolts holding the wipers on came loose from the snow and ice. Pop the cover off, loosen and straighten the wipers where they should be and tighten.
Posted on Mar 11, 2009
Press in on the tab on the center of the blade and pull down perpendicular to the arm. To install, slide the new blade on the hook until it clicks.
Posted on May 09, 2009
Go back to the store, they have a chart showing the correct ones, and if you didn't abuse the first set they'll probably trade you. Ask and I'm sure they'll help you get the right ones. Still have your receipt?
Posted on Jun 15, 2009
wiper gears may be broken, got to junk yard and buy motor and gear assembly for windshield wipers, should only take an hour to change out.
Posted on Feb 15, 2010
Tips for a great answer:
Mar 04, 2015 | 2003 Chevrolet Cavalier
Dec 25, 2013 | Cars & Trucks
May 20, 2013 | Cars & Trucks
Nov 30, 2011 | 2001 Jeep Cherokee
Feb 02, 2011 | Oldsmobile LSS Cars & Trucks
Jan 21, 2011 | 2000 Kia Sportage
Dec 13, 2010 | 2002 Pontiac Grand Prix
With ignition on, turn on wiper switch. When wiper arm gets to point where blade does not touch screen, turn off ignition switch so that wipers do not return to park position. It may take a few goes to stop arm in the right position so repeat process until it is in the best position.
Check main wiper arm and bend slightly towards windscreen so that blade touches screen and there is some spring pressure from the arm to keep blade on screen. Also check that there is no interference between main arm and the section which supports the rubber blade. If you get blade chatter as the arm sweeps, twist the end of the main arm slightly in the opposite direction to the movement that produces the chatter. It may take a bit of trial and error to get it all right.
Oct 04, 2010 | Volvo 850 Cars & Trucks
Mar 30, 2009 | 1995 Geo Prizm
Jul 13, 2008 | 1997 Nissan Sentra
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: