Question about 1988 Mercedes-Benz 190

1 Answer

1998 Ford Expedition check engine light binking on and off

Took truck to shop to clear the check engine light, a full tune was done and the check egine light was gone, a few days later the chec engine light came back on, I took the truck back to the mechcanic and he made the check engine light go out again. During the same day the light came back on, I took the truck back to the mechanic and he told me that if the engine was not experincing any problems not to worry about the check engine light, after about 3 to 4 months later the check engine light started blinking on and off and the engine has lots of hesitation, if at all possible I would appreciate any assistance with this problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 1,940 Answers

Have someone who knows what they are doing try to pull the code, instead of erasing it and telling you it's fine. That is a no go. I would say lots of hesitation could have to do with the crankshaft position sensor, camshaft position sensor, etc.

Posted on Jul 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 FORD EXPEDITION ACCELERATION ISSUES


Do you have a check engine light blinking when this problem occurs? I assume you do because if it is missing and sputtering like you say the engine control computer would detect that and turn on the check engine light. Next step is to have the systems fault codes read through the diagnostic port under the dash in front of the driver, Autozone and others does this test for free.

Jul 13, 2017 | 1998 Ford Expedition

1 Answer

I have a 1998 Ford Explorer that just hit 190,000 miles yesterday and runs fantastic. Earlier this week, I had a tune up done. Today the check engine light began flashing, stays solid for a while, goes...


any time the check engine light is flashing it is the on-board computer telling you that the engine is misfiring, i think i would take it back to whom done the tune-up sounds like they may have cracked a spark plug or damaged a plug wire when they tuned it up.

Jan 29, 2011 | 1998 Ford Explorer

2 Answers

Trying to find out the firing order on a 1998 4.6 for the spark plugs


the firing order for the ford 4.6 is 1-3-7-2-6-5-4-8

Dec 28, 2010 | 1998 Ford Expedition

1 Answer

I have a problem with 1998 Ford Expeditiion 5.4 ltr. 4x4 surging


you chould pull plugs and check them because it sounds like it needs a tune up or you have a crank senser or a cam senser going bad because they control the feul presser

Jan 24, 2010 | 1998 Ford Expedition

2 Answers

1998 Ford Expedition Eddie Bauer SERVICE ENGINE SOON light


Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.

Dec 21, 2009 | 1998 Ford Expedition

2 Answers

My 98 ford expedition check engine light came on and it skips at 65 or higher


you have a bad sensor check all sensors starting with air. berrydalewolf

Oct 26, 2009 | 1998 Ford Expedition

1 Answer

WHEN IT RAINS HARD MY FORD EXPADETION RUNS REALLY SLUGGISH AND MY CHECK ENGINE LIGHT COMES ON


sounds like you need a tune up one way of checking this is with the engine idling spray some water on the ignition wires and coils and see if the idle changes also look for sparks, that's a dead giveaway

Oct 09, 2009 | 1998 Ford Expedition

1 Answer

01 Ford Expedition. Check Engine light and failed Smog check.


whoever installed the egr valve, if it wasnt you, just cleared the engine codes, thus giving you this problem once again. Get it scanned at autozone, and go from there.

May 18, 2009 | 2001 Ford Expedition

1 Answer

98 Expedtion hesitation or miss.


throttle position sensor may be bad or need adjusted .or oxygen sensors could be faulty does it idle ruff till it warms up?or maybe map sensor

Mar 24, 2009 | 1998 Ford Expedition

1 Answer

1998 Ford Expedition


coil pack needs to be replaced engine is not getting any fire

Dec 05, 2008 | 1998 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...