Question about Pontiac Trans Sport

1 Answer

Steering suddenly stopped working/ wheels turn only slightly. Screetching sound when car is running when trying to turn. Power steering fluid topped off. recently had accessory belt & main pully components replaced.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 6,826 Answers

Remove the belt,and see if the power steering pump pulley is locked up,or any other pulley.

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While driving steering wheel locked up


Sounds like your power steering fluid is low. Steering suddenly becomes very hard, then frees up. Did you perhaps hear a whining noise at the time?. Under the hood, find the power steering pump and / or top up bottle, and check the level. Usually a small dip stick is built into the screw top and marked. Use only correct fluid type.

Nov 22, 2013 | 2003 Nissan Pathfinder

4 Answers

2007 f-150 4x4 the steering wheel is geting hard to turn


Low levels of power steering fluid can cause the steering to suddenly become hard and stiff


---------------------------------------------------------------------------------------
FGTech Galletto 2-Master EOBD2

Dec 18, 2012 | 2007 Ford F-150 Super

1 Answer

Steering noise and shutter probems on 1995 ford explorer ltd


Have you bled all air out of the system after refit?
Check the oil level and for any signs of air in the oil.

To bleed the system, you must turn the wheel from lock to lock, whilst topping up the power steering fluid. After a dozen turns or so, stop the engine, and allow the air in the fluid to rise out over several minutes.
Restart the engine, and work from lock to lock another dozen times or so, checking the oil level again.

After doing all that, is there still air in your system?
Is the power steering drive belt slack?

If everything is normal and operating properly, then you may have an issue with your steering rack.

Nov 04, 2012 | 1995 Ford Explorer

1 Answer

Bleed power steering on 2008 dodge avenger


to bleed power steering, with front wheels off ground slightly with front wheels pointing straight ahead.engine off. remove power steering filler cap.add power steering until fluid level stop dropping,wait couple minutes and wait, add fluid until level stay at full cold mark on power steering cap dip stick. dont over fill.when fluid level stop dropping, start vechicle,let it idle few minutes. see if fluid level drop if so add more fluid full cold mark.then turn steering all the way to left and right with out hitting a stop.turn steering wheel several times, then turn front wheels pointing forward check power steering fluid level.if power steering fluid level stop dropping air should be out of system, if steering turning wheel dont turn smoothly and power steering fluid look light tan color air getting in the system.check all power steering lines to rack and power steering pump for leaks.be sure you replaced all the power steering lines with new o rings if not you will get a leak.if you find a leak, you need to fix the leak and bleed system again.dont drive vechicle if your steering dont feel right,have vechicle towed to a garage.

Aug 25, 2012 | 2008 Dodge Avenger

1 Answer

Ford 1993 Taurus steering


Have you checked the power steering fluid level? The reservoir for the fluid will be at the front of the engine, where the belt runs the power steering pump. If it's low or out add a little power steering fluid till full, then start car and slowly turn wheels back and forth from stop to stop-not too ******* the stops (when the steering won't turn further that way...that's what I mean by stops)....Turn wheel one way full travel, then reverse and turn the other way. Check the fluid level again, and add as needed.
If fluid is not low, the belt may be too loose to make the power steering pump work, or you may have a bigger problem that needs professional attewntion.

May 24, 2012 | 1993 Ford Taurus

1 Answer

The power steering isn't working. The reservoir was empty and I added power steering fluid and it still very hard to steer


YOU HAVE A RUPTURE PRESSURE LINE IF YOU HAVE NO POWER STEERING FLUID IN THE POWER STEERING RESERVOIR.LOCATE LEAK THEN BLEED POWER STEERING SYSTEM BY ADDING POWER STEERING TO RESERVOIR.DONT OVER FILL BY FULL COLD MARK ON POWER STEERING DIP STICK.ADD FLUID TO RESERVOIR WAIT A 2 MINUTES.CHECK FLUID LEVEL AGAIN.WHEN POWER STEERING FLUID LEVEL STOP DROPPING.START ENGINE LET IT RUN FOR 10 SECONDS.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID ADD FLUID IF FLUID LEVEL DROPS. WHEN FLUID LEVEL STOP DROPPING.SAFELY RAISE SUPPORT VECHICLE FRONT WHEELS.START ENGINE.NOW TURN STEERING WHEEL GENTLY FROM STOP TO STOP MEANING LEFT TO RIGHT DONT HOLD IN POSITION.LET THE STOP TO STOP BE QUICK.CHECK POWER STEERING FLUID AFTER YOU HAVE TURN STEERING WHEEL ABOUT 7 STOP TO STOP.WHEN FLUID LEVEL STOP DROPPING YOU AT HOT MARK ON DIP STICK BLEEDING PROCESS COMPLETE.TURN OFF ENGINE LOWER VECHICLE BACK TO GROUND WAIT ABOUT 5 MINUTES CHECK YOUR FLUID LEVEL.IF FLUID LOOKS LIKE A TAN COLOR.YOUR POWER STEERING SYSTEM FULL OF AIR.TURN OFF VECHICLE LET VECHICLE SET A LONG WHILE TO AIR BUBBLES SETTLE DOWN LOOK FOR LEAKS AROUND POWER STEERING PUMP FRONT SEAL AND CHECK FOR LEAKS AROUND POWER STEERING LINES.

Dec 01, 2010 | 1999 Oldsmobile Alero

2 Answers

My power stering is not working ok i have replace the power stering pump and i have check the sector and it is ok the car work well when it is runing but when i stop it turn hard i have check if it is air...


Power Steering Fluid Filling & Bleeding
  1. Repair the power steering system.
  2. Turn the engine OFF.
  3. Raise the vehicle so the front wheels are off the ground.
  4. Turn the steering wheel all the way to the left.
  5. Fill the power steering fluid reservoir to the FULL/COLD level and leave the cap off.
  6. Have an assistant watch the fluid in the reservoir while you turn the steering wheel fully to the right and fully to the left at least 20 times. NOTE: On systems with long return lines or fluid coolers, turn the steering wheel from lock to lock at least 40 times.
  7. Add fluid as needed to keep the fluid level at the FULL/COLD level.
  8. Install the reservoir cap and start the engine.
  9. Center the front wheels and lower the vehicle.
  10. Run the engine for about 2 minutes.
  11. Turn the steering wheel in both directions and verify correct power steering operation.

Nov 10, 2010 | 1997 Chevrolet Tahoe

1 Answer

I have had the power steering pump replaced on my 99 pontiac grand prix, since then it has had no problems with power steering for about two months......then all of a sudden its making that whining noise...


YOU NEED TO BLEED POWER STEERING SYSTEM BY HAVING LOW FLUID AIR ENTER THE SYSTEM.PARK CAR ON SOLID LEVEL GROUND SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.YOU CAN LEAVE CAR ON GROUND BUT TURNING STEERING WHEELS BACK AND FORTH WILL WEAR SPOT IN TIRES.TURN STEERING WHEEL TO THE LEFT WITH THE ENGINE OFF.CHECK POWER STEERING FLUID.ADD MORE FLUID IF LOW.MAKE SURE FLUID LEVEL ON COLD MARK ON DIP STICK.THE YOU CRANK CAR UP LET IDLE LITTLE HIGH FOR 15 SECONDS.THEN TURN OFF ENGINE.CHECK POWER STEERING FLUID LEVEL MAKE SURE ITS ON COLD MARK AT DIP STICK.THEN YOU START THE CAR UP WHILE IDLING TURN STEERING WHEEL IN BOTH DIRECTIONS SLOWLY TO THE STOPS DONT HOLD IN STOP TURN STEERING WHEEL LEFT AND RIGHT FOR SEVERAL TURNS.STOP ENGINE CHECK FLUID IF FLUID TAN STILL HAS AIR IN SYSTEM.LET CAR SET A LITTLE WHILE TRY THE BLEEDING PROCEDURE AGAIN.THERE IS A REASON POWER STEERING FLUID WAS LOW CHECK ALL POWER STEERING HOSES AT POWER STEERING PUMP TO THE RACK PINION ASSEMBLY.

Jun 13, 2010 | 1999 Pontiac Grand Prix

1 Answer

2001 Mazda tribute 4wd es driverside front wheel noise?


iam am no doubt totally wrong here ,but i would first of all check the power steering fluid level ,then turn steering from left to right with engine running and check the fluid level again

Dec 23, 2009 | 2001 Mazda Tribute

1 Answer

2004 Jeep Liberty Power Steering Quit Working


I would check for leaks. After the car sits overnight look undernieth the cor on the drivers side. You are most likely going to see a tiny puddle of very thin oil. Check the tubing connections at the pump (mounted to the engine on the drivers side) and the front axel. Be certain to use Mopar power steering fluid when topping off. You may also need to get any air out of the system. Jack up the car so that both wheels are off the ground. With the engine turned off, turn the wheels to left and right lock positions a couple times. Lower the car, top off the fluid if necessary & give it a drive. Hope that works for ya.

Dec 24, 2008 | 2004 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...