Question about 1999 Ford F250 Regular Cab

1 Answer

Toe odometer does not read right. and the mileage

The odometer does not read right and sometimes it drops to 0 and stays their. and the mileage is not working on my 1999 f 250 super duty 2 wheel drive

Posted by on

  • keithapond Jul 10, 2010

    The odometer was it I replaced it and it worked thanks.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello. These two functions are both part of one component. The only fix is to replace the odometer. This is a difficult job in that it involves opening up the dashboard. I recommend calling a couple of local autoelectric repair shops and getting estimates. J.

Posted on Jul 10, 2010

  • keithapond Jul 10, 2010

    Please tell me what the wire like a ground in a black lead housing in the center of the odometer housing in the back should be hooked to. Could that be the problem?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Srs light, crazy odometer then no read outs, engine stalls won't start


Check the battery and alternator wiring connections. Also, check the alternator belt. If it is missing or has no tension, the belt tensioner may be broken. The thumping seems to imply a catastrophic mechanical failure or a small explosion affecting the electrical system, but it may have been unburned fuel igniting in the catalytic converter due to a problem with the engine computer (perhaps it wasn't working right due to the electrical problem).

Jul 09, 2017 | Mitsubishi Cars & Trucks

2 Answers

Cant find where the mileage is stored


This is right from GMC service repair manual
Odometer
The vehicle odometer is calculated and stored electronically in the instrument panel cluster (IPC). The base IPC contains a season odometer and a trip odometer. The uplevel IPC contains a season odometer and two trip odometers. Momentarily press the trip/reset switch on the IPC in order to toggle between the season odometer and the trip odometer. Press the trip/reset switch for greater than 2 seconds, while the trip odometer is displayed, in order to reset the trip odometer.
The IPC calculates the mileage based on the vehicle speed signal circuit from the engine control module (ECM). The odometer will display 'error' if an internal IPC memory failure is detected. The odometer displays either miles or kilometers as requested by the activation of the Personalization button on the steering wheel controls.

Dec 08, 2017 | 2004 GMC Envoy

1 Answer

My 2008 Ford Super Duty Diesel Crew Cab long bed 4 wheel drive switch will not work sometimes up to 10 attempts going from 2 wheel drive to 4 wheel drive and then back to 2 wheel drive from 4wd. At times...


So I would think you have locking hubs on it? So you lock the hubs in and then put it in 4wd and driving sometimes it stays in 4wd when you want to shift it back into 2wd? Sounds like the shifter inside the transfer case is hanging up. In some cases if you drive faster than 50mph and try to shift it back to 2wd it won't do it, unlock the axle and back the truck up to reline the spline gear in the transfer case. I would request the transfer case be replace since its under warranty. And as far as Ford telling you they can't do nothing look in your owners manual and call the complaint office and tell them what dealer you went to. Also I would go back and talk to the manager sounds like someone doesn't want to do his job.

Jul 31, 2010 | 2008 Ford F 250 Super Duty 4WD

1 Answer

The guages on my F350 super duty go crazy while driving


Two possible fixes : 1. Replacing the GEM module. 2. Check the electrical connections including wires.

Jun 01, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

While driving, four wheel drive quit working. It


Check the fuse for the four wheel drive before taking another step,it is electrically engage,hope that help you and clear your mind

Jan 17, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

02 super duty with 7.3 fuel gauge will give false readings.


COULD BE THE FUEL SENDER OR YOU HAVE A POOR GROUND POINT IN THE CABIN.
WEIRD AND MULIPLE MALFUNCTIONS ARE USALLY A POOR GROUND.

Nov 17, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

2000 f350 super duty 7.3 drw steering seems to lock up on hard right and left turns. wheel shakes untill i stop and restart. i can sometimes stop the shaking if i quickly turn right and left while driving....


The control valves from the power steering unit lock in position at extreme angles. Either the fluid is dirty - replace it - or the unit is worn out - valves can be replaced separately and the unit refurbished. Or just buy a new unit.

Oct 12, 2009 | 2000 Ford F350 Super Duty Super Cab

2 Answers

My speedometer and odometer stopped working


Your speed sensor has failed. The vehicles speedometer is not cable controled, it's controled by a sensor in your transmission. It's a easy fix, but the new sensor is about $80 to $100 depending on where you get it.

Apr 28, 2009 | 2002 Kia Sedona

1 Answer

While driving the speedometer and odometer quit working.


you have a problem with your speed sensor, you need to check or replace it.

Apr 28, 2009 | 2002 Kia Sedona

1 Answer

New engine


no they are not required to, because the mileage is on the whole car and not on the engine, since there is many many parts than get older whit the mileage like wheel bearing transmission etc,
the original mileage has to stay the same, the only time they are required to reset the mileage is when the instrument cluster is been replace, it has to read exactly same as the old one,
example, if your car is currently reading 36000 by replacing the cluster it has to be set at 36000, having a new motor does not mean than the car is new again,

Jun 22, 2008 | 2004 Isuzu Axiom

Not finding what you are looking for?
1999 Ford F250 Regular Cab Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

83096 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...