Question about 1984 Chevrolet Chevy

2 Answers

I need to find out whitch spark plug wire goes to the # 1 spark plug

Posted by on

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 142 Answers

The front one on the driver's side.

Posted on Jul 10, 2010

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 478 Answers

The firing order is the raised numers on the intake manifold,the one closest to the front should be 1. It does not really matter which one you start with on the distributor as long as each next one is numerically in order like a clock.

Posted on Jul 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for the wiring of the distributor to the sparks plugs


All you need to do is pull number one spark plug on left front side of engine you can do it yourself or have someone help you to tap ignition key to crank engine over with a rag or your finger plug spark plug hole tap engine over tell you get compression look on crank pulley line up marks to top dead center remove distributor cap mark where the rotor is pointing to number one have your helper crank the engine to see what dierection rotor turns that the dierection of the fireing order whitch is 18436572

Aug 23, 2011 | 1995 Chevrolet Caprice Classic

2 Answers

How do you change spark plugs in a 2004 hyundia sonata


It depends on which engine is in the vehicle. The 2004 Sonata came with two possible powertrains -- the 2.4 Lit L4, and the 2.7 Lit V6.

On the 4 cylinder engine, there are two coil packs and two ignition wires, Below each coil pack is a spark plug (#2 and #4 cylinders). The wire from # 2 coil pack goes to #3 spark plug, and the wire from #4 coil pack goes to #1 spark plug.

Photo:

ghost45_15.jpg
Now the 2.7 Lit V6 requires you remove the surge tank (intake manifold) in order to access the spark plugs & wires on Bank 1 (Right Hand side of the engine).

Photo:
ghost45_16.jpg

Jun 10, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

HOW TO REPLACE 2003 YUKON GMC SPARK PLUGS


Remove the wire from the top of the spark plug by twisting and pulling on the boot part. Then you will need a 14 milimeter plug scocket wrench, turn the wrench counter-clockwise to remove. You install them by doing the steps in reverse. A note of caution: the tightening force is 15 foot pounds of torque whitch isn't a lot of force.
The original spark pulgs are good for at least 100,000 miles unless it's had a problem to cause them to fail. Also installing a different type plug then original equipment has lead to poor performance at times.

Feb 13, 2011 | 2003 GMC Yukon

1 Answer

1998 f 150 5.4L Idle Air Control Under speed error...


yes boot coil ,spark plug whitch ever needs to be repair to stop idle air control code idle air control is trying to compensate and con not

Jul 03, 2009 | Ford F-150 Cars & Trucks

1 Answer

99 rx 300 lean code


p0300 is a random misfire code whitch means you need to check spark plugs, wires/coils, or injectors fire misfire concerns.

Jun 24, 2009 | 2001 Lexus RX 300

2 Answers

My 96 Saturn sc2 wont turn over or start.


Was there oil/coolant in cylinders when they were pulled?

Jun 22, 2009 | 1992 Saturn SL2

1 Answer

Spark plug wires correctly installed on pontiac sunfire


you need to know the firing order and then where #1 plug wire goes. Need a shop manual.

Distributor or distributorless ignition?

Feb 21, 2009 | 2003 Pontiac Sunfire

1 Answer

Replacing spark plug wires


It's gotta be 5.7 V-8 . As u stand in front of the suburban facing the front bumper, there are 4 spark plugs on each side of the engine. The front (of the engine) plug on the drivers side, is plug #1, the front plug on the pass. side is #2, then back to driver side, next plug back is #3, back to Pass side, next plug is #4 etc. to #8. The distributor cap (spark plug wires go from dist. cap (9 wires on top) to each spark plug, Extra wire goes to coil, which sends spark to all wires). The wires fire in the following order: 1, 8, 4, 3, 6, 5. 7, 2. You will have to find where the #1 spark plug goes in the distributor cap, some (hopefully yours ) have a #1 on the top next too where the wire plugs in to the cap. If u find this u r good to go! Put #1 wire in, using a pushing/twisting motion, the wires go in in a clockwise order from #1 as u look down on the distributor. Wires to spark plugs go on w/ same push/twist. You should hear/feel a slight click or snap (not always though!) if inserted all the way. Let me know if this is enough info, if not I'll try to give u more. If u can't find where #1 goes on the dist. cap, stand on the driver side of engine, I believe #1 is at approx. 8 oclock position on the dist cap. Good luck!

Oct 19, 2008 | 1995 Chevrolet Suburban

1 Answer

Diagram for spark plug wires


Firing order 1-6-5-4-3-2
------------
| 2 4 6 |
front | |
| ------- |
| | 6 5 ||
of | | 1 4 ||
| | 2 3 ||
| ------- |
vehicle | |
| 1 3 5 |
------------
Distributor rotates clockwise

Sep 15, 2008 | 1997 GMC Jimmy

1 Answer

Spark plugs


I believe you will need a 3/8 spark plug socket. removed spark plug wires. remove spark plugs and install new plugs. Tightening torque is 27 Nm then reinstall spark plug wires with corresponding cylinder left to right goes 1-4.

Sep 07, 2008 | 2003 Mini Cooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...