Question about Cars & Trucks

1 Answer

I have a Mazda cx 7. The turbo needs to be replaced. Can you just disconnect the turbo?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

It is not really possible to "disconnect" a turbo. Its bolted to the exhaust manifold and all the exhaust gas is routed through it. you would have to try to find a header or exhaust manifold the was built for that car and not designed to run the turbo. Even if you were able to do this you would still have to have someone advance the timing back to where it should be for a natuarlly aspirated engine and re program the computer / change fuel enjector sizes to get the air fuel ratio back to ideal. (running without the turbo would cause your engine to run rich with fuel and cause engine fouling problems not to mention poor fuel economy.)

Posted on Jul 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install Turbo Mazda CX 7


have it done by an accredited turbo specialist installer with a chassis dyno
that way the ECM can be rechipped to get the maximum benefit of the turbo

Nov 28, 2016 | Mazda CX-7 Cars & Trucks

1 Answer

2007 Mazda CX-7 turbo. Strong exhaust smell in cabin through the a/c vents. Only happens when hard acceleration.


I would see the dealer on this issue, this may be a built in problem and there may be a dealer bulletin on it.

Sep 26, 2016 | 2007 Mazda CX-7

1 Answer

Does Low Oil Pressure=new engine?


Your oil pressure should be between 10 and 20 psi. And if it is low or you don't have Amy oil pressure change the pump. But no you don't need a new engine if you fix the problem in time

Apr 23, 2017 | 2007 Mazda CX-7 Grand Touring

1 Answer

2009 mazda CX-7 an interference or non-interference engine?


the book does not specify that it is an interference engine but it specifically states not to turn the crank shaft with the chain disconnected. To me this means, treat it as possible valve damage if the chain has broken or if you turn the crank with the chain missing.

May 14, 2014 | 2009 Mazda CX-7

1 Answer

I have a 2007 Mazda CX-7. It has been driving just fine (after a timing chain replacement and a turbo replacement in. The last 7 months. Last night (Friday) my check engine light came on. The guy at...


Here's what it says Heather,
  • The crankshaft position sensor identifies position of the crankshaft to the ignition control module (ICM), engine control module (ECM) or powertrain control module (PCM)
  • When not replaced, vehicle could experience no- or hard start, long crank time, misfire, lack of power, excessive hydrocarbons in oil, spark plug fouling, catalytic converter failure, poor fuel economy, CEL/MIL illumination or intermittent shutdown.I would say,go for it.

Mar 23, 2013 | 2007 Mazda CX-7 Grand Touring

1 Answer

Do mazda cx7 year 2009 have problems with the turbo? I think mine may have gone then is a whearing noise whislt excelerating?


While turbo spooling is normal, there can be an access amount if the bearing is bad, do not know if Mazda has this problem but i know it runs rampant in most turbo cars that spend a lot of time driving in the 3500-4200 RPM range.

Jun 26, 2011 | 2009 Mazda CX-7

1 Answer

I need to replace the turbo on my mazda cx7 i cannot find a manual, how do i take the turbo off


Can i take Turbo off Madza CR-7 and bypass it with something else that would work. Have put 5 Turbos on Car in last 6 months two differant Machanics. last ont went 6 miles and it went bad. what is the problem?

Mar 02, 2010 | 2007 Mazda CX-7 Grand Touring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...