Question about 2000 Cadillac Seville
Open the trunk and locate the screw that hold the lense assembly, remove screws, turn the socket that holds the brake bulb which will releas the socket, pull out the bulb, and replace with new bulb, reinstall in reverse order.
Posted on Jul 10, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck
Posted on Jan 30, 2009
you will need to remove the parking brake cable from the caliper then remove the lower slide pin bolt, flip the caliper up and pull out the old pads and install the new ones. You should get the rotors machined for the best braking performance or replace them.
Posted on May 02, 2009
Very easy, just remove front tires and unbolt, BUT I doubt you are asking right question. Not mounts, but mount in dead front center is problem. There are 4 mounts, transmission center back, left center and right center and front center. That takes full torque of motor and heat from exhaust. GM has a shield for exhaust.
Posted on Mar 01, 2010
Tips for a great answer:
Jan 11, 2016 | Cadillac Cars & Trucks
Aug 13, 2015 | Cadillac Cars & Trucks
Jul 16, 2015 | Cadillac Cars & Trucks
Apr 14, 2013 | 1999 Cadillac Seville
Apr 06, 2013 | 2000 Cadillac Eldorado
Apr 29, 2012 | 1995 Cadillac Seville STS
Mar 28, 2010 | 2000 Cadillac Seville
Dec 02, 2009 | 2000 Cadillac Seville
Apr 17, 2009 | 1994 Cadillac DeVille
569 people viewed this question
Usually answered in minutes!