Question about 2000 Mazda 626

Open Question

I have a 1998 mazda 626 the brake lights are not working. I have checked both fuse boxes. What is wrong?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 651 Answers

SOURCE: CHANGING REAR BRAKE PADS

the best thing you can do is go to an autoparts store and purchase a haynes repair manual for your car. cost about $18, but will show you everything you need to know, with pictures.

Posted on Nov 28, 2008

  • 2 Answers

SOURCE: 2000 Mazda 626 brake lights

It may be the switch on the brake pedal, it should be located on top of the brake pedal arn.

Posted on Apr 08, 2009

emissionwiz
  • 75066 Answers

SOURCE: fuse box for 1998 mazda b3000

There are really 2 boxes
Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
fuses

Power distribution box
The power distribution box is
located in the engine compartment
near the battery. The power
distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
from overloads.

Posted on Jun 01, 2009

  • 1986 Answers

SOURCE: brake lights don't come on. checked fuse box,

look up above your brake pedal and you will see the switch.. It will either between the firewall and the pedal arm (switch moves in when you brake).. Or it will be between the pedal arm and the dash (switch moves out when you brake)

Posted on Oct 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 Mazda 626 brake lights (all 3) not working.


I know the answer to this. I just fixed my in laws 1999 626 with your exact problem. Power comes through the brake switch, and into what they call a "joint box". Basically this joint box is the back side of your fuse box where all the connectors go. Most likely you have a bad box, or connection at the box. It is the only other thing between your brake switch and rear brake lights.

Jun 15, 2012 | 2000 Mazda 626

1 Answer

We have a 2002 Mazda 626 the tail lights and dash lights are not working. There is no fuse in the fuse box inside the car for these lights. What could the problem be?


you may have the wrong light bulbs in the rear. Take them out one by one and look at the bottoms. Make sure they are the correct lights. If the bulb only has one pin, make sure the reciever is only one pin. Sometimes when the wrong bulbs are bought and installed, lots of weird stuff will happen. As far as the fuse box goes, double check your listings. These lights definately have a fuse(somewhere in there)

May 25, 2011 | 2002 Mazda 626

2 Answers

My 99 Mazda Brake lights stopped working


Check the ground to the brake light socket. I had a similar problem on a 98 626 and found the ground connector corroded in the socket.(it is on the outside of the socket between the metal insert and plastic housing) Pulled the remnants of the connector out far enough to solder a piece of wire onto it and then soldered it to the metal socket. Lights started functioning normally again. It seems that a bad ground on one socket affects every light in the circuit.

Jun 06, 2009 | 1998 Mazda 626

3 Answers

1999 Mazda 626 no rear lights!


checked the fuse of the park light.

Apr 15, 2009 | 1999 Mazda 626

1 Answer

1998 mazda protoge no brake lights


you just have a bad connection in there or you got a bad ground have someone check that..

Dec 05, 2008 | 1998 Mazda 626

1 Answer

1998 mazda protoge brake lights do not work checked fuse...ok.... changed brake light switch but still no brake light... any suggestions?


stupid question but have you checked that all the globes arnt blown.
also have you adjusted the stop light switch properly.

a good test to to is check your globes replace them if you are not shore of them then un plug the stop light switch and earth out the two pins in the plug then check if the light come on.
if they do you may still have a faulty new switch our it might need adjusting

Dec 05, 2008 | 1998 Mazda 626

1 Answer

Mazda 626 1998 brake lights not working


A- AT BRAKE PEDAL-CHECK FOE WIRES LEADING TO SWITCH, IF CON.IS OK,PRESS DOWN ON PEDAL, WATCH PLUNGER ON OPOSITE END. IF OPERATING COR. CHECK FUSE. TURN SIGNSLS OK,EMG SIGNSL OK?

Oct 08, 2008 | 1998 Mazda 626

2 Answers

2000 Mazda 626 brake lights


try brake light switch on top of brake peddle

Sep 13, 2008 | 2000 Mazda 626

Not finding what you are looking for?
2000 Mazda 626 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...