SOURCE: 4 Faults detected on engine diagnostics check
Try first unplugging battery cable for ten minutuse, to reset ECM, and do a scan again, there are too many unrelated error codes at the same time
SOURCE: ABS light handbrake light allways on
check to see of you can get any faults from abs control module, if abs control module can not be scanned, check fuses, if fuses ok, it will need an abs control module.
SOURCE: the ABS and air-bag light are permanently on and a warning light
kenchyke, the shop may have disabled the air bag system to work on the car, and possibly forgot to activate it again. While this seems a bit odd to me that they could overlook this but, since it started after the work was done, you need to return it to the shop asap to have them check it out. Although the car runs fine, the abs system and the air bags won't operate, which could result in injury if you are in an accident (air bag will not deploy, abs probably disconnected).
SOURCE: ESP,ABS and brakelights comming on
hello,good day,try to replaced your brake light switch,this switch have 2 function,for brake light and for esp and bas module,ty
SOURCE: My Mercedes ML 270 cdi ABS etc lights and gearbox.
87 views
Usually answered in minutes!
×