Question about 2003 Toyota Camry

2 Answers

Why weneed O/D on transmission if I wanna to off it it must show on panel off?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,940 Answers

The O/D light on dash stands for Overdrive. This button can be on the end of the turn signal lever, on the dash, and even on the shifter. If you push the button/switch the light will change to OD, OD on, or even go out, meaning you are in overdrive. Being in overdrive is good, except for steep hills or pulling a heavy load.

Posted on Jul 10, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,019 Answers

Overdrive is a very high final drive gear ratio, to save gasoline. But you should turn it off on hills or if you are going too slow. There should be an indicator light telling when it is on, but it should go off automatically if you are not in the highest regular gear, and if you are not going fast enough.

Posted on Jul 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a bad transmission on my Lincoln Town Car 2007 4.6 engine,i wanna buy use one i wonder which code or model i should buy


bring the vin number located on your reggie or insurance card to salvage yard. they can cross it.

Apr 14, 2016 | Lincoln Cars & Trucks

1 Answer

My question is I have a Hyundai 2006 while im driving the car go to D and D1D2D3.when is in D1 it dnt wanna drive fast .I wanna know what cause dats my first car and I love the car .please help me


All transmissions start in a low gear that is not meant for speed. When it is in D1, the transmission stays in 1st gear and wont move to a higher gear by itself. When you select D2 it starts in 1 and moves to 2 and then wont move any higher.

May 26, 2015 | Hyundai Cars & Trucks

1 Answer

I have a 5 speed wen i come off the cluch and get up to high rpm it fill like my trans is sliping


The clutch is probably worn out and slipping and needs to be replaced. With a manual transmission, if the engine revs and the car doesn't accelerate at the same pace, the clutch is slipping. This usually gets very very worse almost instantly. The clunking could be related or it could be an unrelated problem you're just noticing now that you have a slipping clutch. Has the car recently made clicking noises while turning sharp corners or in reverse? If yes, maybe a bad CV joint. If you don't have the technical aptitude to remove the transmission and replace the clutch, I suggest taking it to a shop to have them check into it. Clutches are a wear item and go bad around 90,000 miles of use.

Mar 10, 2014 | 1988 Chevrolet Cavalier Z24

1 Answer

Wene I start to speed up the gears want swicth it just make a raddiling noise


I would start by checking the transmission oil level. Smell the oil. If it smells like it's burnt, you need to have the oil and filter replaced, if that doesn't work you have a transmission problem. If it looks and smells OK, then it my be something simple like a modulator valve.

Nov 25, 2010 | 1998 Ford Crown Victoria

1 Answer

Automatic transmission slams into gear while driving. do i need a new transmission.


you may wanna try to service the tranny and change the filter and screen and add sum lucas transmission treatment,if this doesnt help you will need to replace the transmission more than likely

Jan 21, 2010 | 1999 Ford Escort

2 Answers

I have a 1995 gmc yukon with a 700r4 tran. wene driving normal it does fine its a little weak but fine. but wene i get into the gas from a dead stop,passing or getting on the inerstate the engine reves up...


Sounds like it could be a torque converter problem. Yours is an electronic 700r4. Take this to a reputable transmission shop for repairs. There are a multitude of problems associated with the symptoms you describe.

Jan 09, 2010 | 1995 GMC Yukon

2 Answers

Truck doesnt wanna shift transmission is not slipping just dont wanna shift and it shakes when shifting to over drive


The vacuum modulator on side of transmission::
vacuum hose is disconnected or the diaphragm in the mod is ruptured, causing overdrive to shift to soon.
Replace ($20 AutoZone) ... no special tools.

Sep 28, 2009 | 1992 Chevrolet C/K 2500

Not finding what you are looking for?
2003 Toyota Camry Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...