Question about 2003 Mitsubishi Outlander

1 Answer

My Shogun 3.2 Diesel will not start Engine starts but cuts out on key release

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Your key needs recoding.have you got spare you can try?if not then while you are at it you can get two done....

Posted on Jul 10, 2010

Testimonial: "Thanks for that, I guessed it could be. Any ideas on how I could do this as my car will not start so I can not take it to Garage/Dealer"

  • geoff hunter Jul 10, 2010

    as the recoder is similar to a laptop,the mech may come to you.

    job takes 30 mins max.....

  • Jim Dyson Jul 16, 2010

    Car taken to main dealer in Preston, apparantly "fuel Blockage" post filter (which I had "Bled")
    Not Transponder issue after all, Many thanks for your informed suggestions and if there is anything I can help you with please ask.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shogun 3.2 diesel. engine starts and runs fine. abs and other lights stay on. result is no brakes. can anyone help


The ABS system is computer module controlled, you need to have this module scanned, there will be fault codes to help in diagnosing the problem(s) with the ABS

Nov 02, 2016 | Cars & Trucks

1 Answer

1990 Cat 426B turbo backhoe Turn key to start runs until I let go of key. And suck life out of battery after like 5 revolutions Replaced:starter,cables,battery,ignition key switch,& relays?


Hi Rick:
This should be a diesel engine so if it starts when the key is turned to the start but stops when the key is released, the fuel is being shut off since a diesel will continue to run as long as it is getting fuel.
Something is wrong with the fuel shutoff solenoid or the switch connection that is providing power to it.
I'd be trouble shooting the intended wiring function with a voltmeter or continuity meter.
Cheers

Apr 05, 2016 | Cars & Trucks

1 Answer

Management light comes on now and again


no year no joy, not here.
what size diesel
in what country,
they vary by all that.

Sep 06, 2015 | Isuzu Pickup Cars & Trucks

1 Answer

How toprogramm car key toyota matrix


  • 1 First you will need to purchase a blank Toyota transponder key. You can do this from the dealership, a locksmith, or an online source such as eBay. Once you have the key, take the blank key and the master key to a locksmith that he or she can duplicate the key. This will be much cheaper than the dealership.
  • 2 Now that you have the newly cut key and the master key, you can program the Toyota transponder key. Sit in the driver's side of the Toyota vehicle. Press and release the brake and gas pedal simultaneously.
  • 3 Insert the master transponder key. Do not turn it. Push and release the gas pedal 5 times within at least 15 seconds of inserting the master key.
  • 4 Press and release the brake pedal 6 times within 20 seconds of completing step 3, then remove the master transponder key.
  • 5 Insert the newly cut transponder key into the ignition, but do not turn. Press the gas pedal once.
  • 6 Wait up to 2 minutes or whenever the security light on the dashboard turns off. Once the light goes off, remove the new transponder key and press the brake pedal once. The new transponder key should now be programmed. Test the key by attempting to start the engine. If the engine does not start, repeat the steps above.
  • Mar 02, 2015 | 2010 Toyota Matrix

    1 Answer

    My shogun 3.2 did starts buy cuts out after 5 seconds


    sounds like the computer is not recognizing the ignition key. Do you have the original key?

    Jan 05, 2015 | 2005 Mitsubishi Outlander

    1 Answer

    Anti-thief system cut off power to den gine an won't cut it back on


    If you are dealing with the anti theft the anti theft will flash as you are trying to start the vehicle if this is the case then it is the anti theft if not then you are not dealing with a ant theft issue. You can do a 30 minute relearn procedure without a scan tool. here is how Turn ignition on without the engine reunning.attempt to start the vehicle then release the key to ON.(vehicle doest start) Observe the security light.afeter 10 minutes the security light will turn off.Turn off the ignition and wait 5 seconds.do this 3 times for 30 minutes. start the engine with the engine started the vehicle will learn the passlock key.

    Feb 24, 2012 | Cars & Trucks

    1 Answer

    Engine cut off, wouldn.t start 6.0


    You need to flush your fuel system completely and get a new fuel filter.

    Sep 12, 2009 | 2004 Ford F350

    1 Answer

    Anyone know the engine oil capacity for a 97 2.8 turbo diesel shogun thanks


    Hi, your engine oil capacity for your 2.8 is 7.8 litres of oil including new filter,when you have done this start car and wait until oil light go's out this will indicate that the oil filter is full with oil,turn off engine and check oil level on dipstick again.
    hope this helps you.
    George.

    Jun 15, 2009 | 1995 Mitsubishi Montero

    1 Answer

    My 89 isuzu trooper will start and run great as long as i keep the key all the way engaged 4 or 5 secs after i release it will die can you help


    This is most likely a faulty ignition switch, when you release the key and it cuts the engine this is a lost live feed to the coil if petrol or stop soenoid if diesel
    check ignion switch for a live feed to the coil/stop solenoid when cranking

    Feb 17, 2009 | 1994 Isuzu Trooper

    Not finding what you are looking for?
    2003 Mitsubishi Outlander Logo

    580 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...